PE83.70-P-2102-60SA | Legend of wiring diagram for heater booster control module | MODEL 220 as of 1.6.00 with ENGINE 613, 628, 648 |
Code | Designation | Coordinate |
A6 | STH or HB heater unit | 4A |
A6A6b1 | Temperature sensor | 20A |
A6A6m1 | Circulating pump | 22C |
A6A6m2 | Combustion air blower | 23C |
A6A6n1 | STH or HB control module | 6A |
A6A6r4 | Glow pin unit flame monitor | 20C |
F1/1 | Right fuse box | 1L |
F1/1F1/f41 | Fuse 41 | 1K |
N72 | Lower control field control module | 5L |
N72s24 | Heater booster switch | 6L |
N72/1 | Upper control panel control module | 8L |
S4/3 | Heater booster switch | 3L |
W36/1 | Ground (right footwell) | 1G |
W50 | Ground shielding, right star connector | 16J |
X30/4 | Right voltage distributor (CAN) connector | 17L |
X30/6 | Cockpit voltage distributor (CAN) connector | 12L |
Y23 | STH or AUH fuel metering pump | 14L |
Z20/20 | Cable end not insulated, placed inside insulated tubing | 16E |
Z73 | Right CAN voltage distributor screening connector sleeve | 16H |
Z81/4 | Circuit 58d in FSS [RBA] connector sleeve | 2G |