PE82.71-P-2000-60A | Legend of wiring diagram two-way radio | MODEL 202 |
Item | Designation | Coordinate |
A1 | Instrument cluster | 22L |
A1r1 | Instrument illumination rheostat | 22L |
A49/1 | Interference suppression filter 1 | 15L |
A49/1x2 | Interference suppression filter 1 connector, output | 14J |
A49/2 | Interference suppression filter 2 | 12L |
B25/1 | Microphone | 14L |
F4 | Fuse box in trunk | 4A |
F4f9 | Fuse 9 | 4B |
F7 | Fuse box I, rear right wheel housing (police) | 2A |
F7f8 | Fuse 8 | 2B |
F7f9 | Fuse 9 | 1B |
F8 | Fuse box II, rear right wheel housing (police) | 6A |
F8f7 | Fuse 7 | 6B |
F8f8 | Fuse 8 | 6B |
G1 | Battery | 8A |
H4/19 | Left front door double coil speaker | 25A |
H4/20 | Right front door double coil speaker | 25A |
K43 | Two-way radio relay | 2L |
R26 | Two-way radio volume control | 26L |
S34/1 | Two-way radio master switch | 5L |
U624 | Valid for two-way radio in 2m band | 20A |
U625 | Valid for two-way radio in 4m band | 21A |
U626 | Valid for two-way radio without volume control | 17F |
U627 | Valid for two-way radio with volume control | 21F |
W10 | Ground at battery | 8E |
W19/1 | Ground crossmember, front right seat (police) | 3H 20L 24L |
X18 | Interior / taillamp harness connector | 21F |
X35/41 | Driver door separation point | 25C |
X35/42 | Front passenger door separation point | 24D |
X58/2 | Two-way radio set charge connection | 7K |
X58/3 | Microphone separation point | 13H |
X60 | Volume control intermediate connector | 19H 25H 28H |
Z9 | Circuit 15u connector sleeve | 4E |
Z20/10 | Cable end not insulated, placed inside insulated tubing | 21D 22D |
Z20/11 | Cable end not insulated, placed inside insulated tubing | 21C 23C |
Z81 | Circuit 58d connector sleeve, feed from instrument cluster (IC) | 22H |
Z81/4 | Circuit 58d connector sleeve in FFS | 4G 19L 23L |