PE82.70-P-2000-60C | Legend for wiring diagram of telephone (CTEL) | MODEL 210 up to 28.2.97 with CODE (491) USA version |
Abbreviated designation | Designation | Coordinate |
A1 | Instrument cluster | 14L |
A2 | Radio | 1L |
A34 | CTEL [TEL] handset | 32L |
A34/3 | CTEL [TEL] charging unit | 4L |
A35 | CTEL [TEL] transmitter-receiver | 4A 12A 20A 29A |
A35/3 | In-dash controller (IDC) | 19L 26L |
B25 | Hands-free microphone | 13L |
B25x1 | Hands-free microphone connector | 12K |
F1 | Fuse and relay box | 3L |
F1f23 | Fuse 23 | 2K |
F4 | Rear fuse box | 8L |
F4f15 | Fuse 15 | 8K |
H4/14 | Right front HFS [FSA] speaker | 11L |
H4/15 | Left front HFS [FSA] speaker | 9L |
M11 | Automatic antenna | 27L |
U57 | Valid for station wagon | 5A 17G |
U58 | Valid for sedan and limousine | 6A 17G |
W6/1 | Ground (left taillamp in trunk) | 6E 18H 28H |
W7/1 | Ground (right rear taillamp in trunk) | 5E 17H |
X39/3 | Left and right front speakers separation point (4-pin) | 10E |
X39/5 | Transmitter-receiver/handset connector | 29H |
Z6/2 | Ground supply connector sleeve (solder joint in connector) | 14E |
Z6/23 | Ground connector sleeve (solder point in connector ) | 24G |
Z7/37 | Circuit 30 connector sleeve (solder joint in connector) | 8E 27G |
Z20/2 | Shielding placed inside insulated tubing | 21G |
Z20/3 | Shielding placed inside insulated tubing | 33F |
Z20/4 | Shielding placed inside insulated tubing | 32F |
Z20/5 | Shielding placed inside insulated tubing | 20G |
Z20/6 | Shielding placed inside insulated tubing | 12G |
Z20/25 | Cable end not insulated, placed in insulating hose | 19F |
Z20/26 | Cable end not insulated, placed in insulating hose | 19K |
Z20/27 | Cable end not insulated, placed in insulating hose | 29F |
Z20/28 | Cable end not insulated, placed in insulating hose | 29H |
Z28/25 | Left/right speaker connector sleeve (+ signal) | 11G |
Z28/26 | Left/right speaker connector sleeve (- signal) | 10G |
Z28/29 | CTEL [TEL] ground connector sleeve (in harness) | 25G |
Z28/30 | CTEL [TEL] feed connector sleeve (in harness) | 26G |
Z81/4 | Circuit 58d connector sleeve (frame floor) | 16G |