PE54.22-P-2000-60E | Legend for wiring diagram of data link connector/diagnostic socket | MODEL 163 up to 30.11.99 |
Item | Designation | Coordinate |
A1 | Instrument cluster | 29A |
A6 | Stationary heater / heater booster unit | 31A |
F1 | Fuse and relay module | 1C 12C 22C |
F1f13 | Fuse 13 | 23C |
F1f22 | Fuse 22 | 19C |
F1k12 | Circuit 15 relay | 5C |
G1 | Battery | 5G |
N2/2 | Emergency tensioning retractors, airbags and side airbags control module | 26A |
N3/4 | Engine control module (HFM-SFI [HFM]) | 11J 18J |
N3/10 | Motor electronics (ME) control module | 9J 16J |
N10 | All-activity module | 2A 12A 23A 27A |
N15/3 | ETC control module | 25A |
N47 | Traction systems control module | 21J |
N71 | Headlamp range adjustment control module | 28A |
S2 | Starter switch | 3L |
U25 | Valid for electronic transmission control (ETC [EGS]) | 25A |
U536 | Valid for engine 112/113 | 8K 16K |
U556 | Valid for engine 111 HFM | 10K 17K |
U579 | Valid for stationary heater (STH) | 30A |
W16/4 | Ground (output ground - component compartment - right) | 6L |
W16/6 | Ground (electronics ground - component compartment - right) | 14F |
W29/2 | Ground (right A-pillar) | 12E |
X11/4 | Data link connector (DTC readout) | 8L 17L 27L |
X12/3 | Circuit 30, 15, 31 terminal block, 3-pin | 4E |
X18 | Interior/taillamp wiring harness connector, cockpit | 25G |
X18/12 | Cockpit/stationary heater connector | 30E |
X22 | Engine compartment / engine connector | 11G 18G |
X33/19 | Engine control module programming voltage connector | 8F |
Z50/3 | Cockpit connector sleeve, circuit 31, I left | 12H |
Z50/4 | Cockpit connector sleeve, circuit 31, II right | 12F |
Z50/5 | Cockpit connector sleeve, circuit 30 | 2G |
Z50/11 | CAN-L cockpit connector sleeve | 21H |
Z50/12 | CAN-H cockpit connector sleeve | 14H |
Z50/17 | Cockpit connector sleeve, diagnosis | 29H |