PE54.10-W-2000-60BH | Legend of wiring diagram of battery, voltage supply | with code (E30) Battery master switch (1-pin) |
Code | Designation | Coordinates |
A3 | Drive control (FR) control unit | 24A |
A5 | GGVS control unit | 12H |
A7 | Base module (GM) | 27L |
A26 | Diode holder | 26F |
A42 | Immobilizer read-out electronics | 23L |
F2-A7 | Fuse, instrument illumination, tml. 58 (base module) | 26K |
F77 | Fuse, tachograph, tml. 30 | 7G |
G1 | Battery | 10J |
K2-A37 | Relay, tml. 15 for FR/FMR and MR/PLD with GGVS (relay holder A32) | 16L |
K87-A69 | Close doors pulse relay < 3 bar/powerless (accessories plate A69) | 3L |
K2 | Battery disconnect switch | 11K |
P1 | Tachograph | 5L |
P2 | Instrument (INS) | 29L |
S1 | Drive switch | 20F |
U97 | Valid for Telma retarder | 18J |
V3-A26 | Diode 3, GGVS hold voltage, Instrument cluster (diode holder A26) | 28E |
V4-A26 | Diode 4, GGVS hold voltage, hazard warning flasher (diode holder A26) | 27E |
V5-A26 | Diode 5, GGVS hold voltage, vehicle lighting (diode holder A26) | 26E |
X5.4 | Cab-chassis connector | 7F |
X8 | Terminal connector, tml. 30, battery carrier | 19L |
X9 | Circuit 31 terminal block, battery rack | 9L |
X14 | Terminal connector, tml. 30, connector plate, cab to chassis | 20L |
X15 | Terminal connector, tml. 31, connector plate, cab to chassis | 7L |
X18.1 | Roof connector | 2F |
X31.1 | Ground bolt, front end | 25L |
X88.1 | Connector, door control | 2G |
XB.30.1 | Tml. 30 weld | 21L |
XQ.30.1 | Tml. 30 crossmember weld | 8L |
XT.1.2 | Tachograph connector | 4G |