PE27.19-P-2102-60FA | Legend of wiring diagram of electronic selector lever module control unit | TRANSMISSION 722.6 in MODEL 203 |
Code | Designation | Coordinates |
A0 | Color code key | 32L |
A62 | Gear indicator sensor | 12L |
E12 | Gear display | 16L |
N10/1 | Front SAM control unit with fuse and relay module | 3L |
N15/5 | Electronic selector lever module control unit | 4A |
S16/5 | Transmission mode switch | 21L |
S16/5e1 | Shift gate illumination | 20L |
S16/5s1 | Transmission mode switch | 20L |
S16/6 | Kickdown switch | 25L |
U12 | Valid for left-hand drive vehicles | 2E |
U13 | Valid for right-hand drive vehicles | 2E |
U43 | Valid for ECE | 5E |
U150 | Valid for engine 112 | 24E |
U198 | Valid for engine 611 | 24E |
U199 | Valid for engine 612 | 24F |
U208 | Valid for model 203.7 | 5E |
U521 | Valid for engine 111 | 24F |
U630 | Valid for and | 10E |
U791 | The electrical switching contact of the kickdown switch (S16/6) is not applicable. The function is taken over phased in from the accelerator pedal sensor (B37). | 24E |
U811 | Valid for all except | 19E |
U812 | Valid for | 10E |
W18 | Ground (left front seat crossmember) | 3F |
W19 | Ground (right front seat crossmember) | 3F |
X11/4 | Data link connector | 10L |
X63/4 | CAN databus adapter connector (2-pin) | 29L |
CAN C | Engine compartment CAN | 29K |