PE26.45-W-2000-60CB | Legend of wiring diagram for power take-off | Transmission 715.52/50 in model 930, 934, 932, 933 as of 2.4.07 Transmission 715.51 in model 930, 934 as of 2.4.07 Transmission 715.54 in model 932, 934, 930 as of 2.4.07 |
Code | Designation | Coordinates |
A7 | Base module (GM) | 6A |
A22 | Parameterizable special module (PSM) control unit | 40L |
A68 | Master switch module 4 | 54A |
A78 | Dash support switch module 3 | 53G |
A79 | Dash support switch module 5 | 54L |
F6-A7 | Tml. 30 modular switch panel, interior CAN star quad 3 fuse | 48B |
M1 | Starter | 13K |
S23 | PTO 1 indicator switch | 6L |
S64 | PTO 1 switch | 55G |
S65 | PTO 2 switch | 54G |
S66 | Power take-off 3 switch | 54G |
S79 | PTO 2 indicator switch | 25L |
S80 | PTO 3 indicator switch | 11L |
S108 | Working speed control switch | 53G |
S197 | Power take-off interlock switch | 29L |
U5 | Valid for left-hand drive (LHD) vehicles | 53B |
U6 | Valid for right-hand drive (RHD) vehicles | 56B |
U47 | Valid for PSM | 15C |
U92 | Valid for power take-off without shift lock | 16H |
U128 | Valid alternatively | 27G |
X2.3 | Cab-chassis connector | 35H |
X36.1 | Speed sensor/shift force assistance connector | 7F |
X38.1 | PTO connector | 4F |
X38.2 | PTO connector | 23F |
XG.5 | Power take-off PSM weld | 7L |
XG.7 | Shift lock weld | 28L |
XG.8 | Tml. 31 weld | 8L |
Y46 | PTO 1 solenoid valve | 4L |
Y47 | PTO 2 solenoid valve | 26L |
Y48 | PTO 3 solenoid valve | 9L |
Y146 | Power take-off lock valve | 34L |
CAN 1 | Vehicle CAN | 43D |
CAN 2 | Interior CAN | 46D |