PE07.61-P-2101-60FL | Legend of wiring diagram for ME-SFI [ME] gasoline injection and ignition system control unit | ENGINE 272 as of 1.6.05 in MODEL 203 |
Code | Designation | Coordinates |
A0 | Color code key | 40L |
A9 | Refrigerant compressor | 15L |
A9x1 | Refrigerant compressor connector | 15K |
B4/3 | Fuel tank pressure sensor | 32L |
B37 | Accelerator pedal sensor | 24L |
F32 | Front prefuse | 19L |
F32f5 | Prefuse 5 | 19K |
M1 | Starter | 14L |
M4/7 | Engine and AC electric suction fan with integrated control | 20L |
N3/10 | ME-SFI [ME] control unit | 4A |
N10/1 | Front SAM control unit with fuse and relay module | 4L |
S40/3 | Clutch pedal switch | 17L |
U1 | Valid for | 16E |
U12 | Valid for left-hand drive vehicles | 2D |
U13 | Valid for right-hand drive vehicles | 2E |
U24 | Valid for manual transmission | 16E |
W9 | Ground (left front, at lamp unit) | 20G |
W16/3 | Ground (left assembly compartment, power ground) | 17G |
W16/5 | Electronics ground (left of component compartment) | 3E |
W16/6 | Electronics ground (right of component compartment) | 3E |
X11/4 | Data link connector | 7G |
X25/4 | Fuel tank (pressure, activated charcoal filter) connector | 30H |
X25/9 | Activated charcoal filter connector | 29J |
X26/2 | Engine separation point connector | 11G |
X63/4 | CAN databus adapter connector (2-pin) | 27L |
Y58/1 | Purge control valve | 22L |
Y58/4 | Activated charcoal filter shutoff valve | 30L |
Z7/36 | Circuit 87 M2e connector sleeve | 30E |
Z7/36z1 | Circuit 87 M2e connector sleeve | 5G |
CAN C | Engine compartment CAN | 27K |