PE07.61-P-2101-60FA | Legend of wiring diagram of ME-SFI fuel injection and ignition system control module | Engine 111 in model 203 |
Code | Designation | Coordinate |
A0 | Explanation of color codes | 40L |
B4/1 | Left fuel level sensor | 11L |
B4/2 | Right fuel level sensor | 12L |
B4/3 | Fuel tank pressure sensor | 19L |
B37 | Accelerator pedal sensor | 24L |
F32 | Front prefuse | 33L |
F32f5 | Prefuse 5 | 32K |
G3/1 | O2 sensor downstream TWC [KAT] | 14L |
G3/1x1 | O2 sensor downstream TWC [KAT] connector | 13J |
M3 | Fuel pump (FP) | 11L |
M4/7 | Electric suction fan engine and AC with integrated control | 31L |
N3/10 | ME-SFI [ME] control unit | 4A |
N10/1 | Front SAM control unit with fuse and relay module | 4L |
N10/1f51 | Fuse 51 | 34J |
N10/1f53 | Fuse 53 | 2J |
N10/1f54 | Fuse 54 | 3J |
N10/1kP | Circuit 15 relay | 35L |
N10/1kR | Circuit 87 relay, engine | 3L |
S16/6 | Kickdown switch | 21L |
U1 | Valid for | 17E |
U12 | Valid for left-hand steering | 4C |
U13 | Valid for right-hand steering | 4C |
U665 | Not valid for compressor engine | 7D |
U791 | The electrical switching contact of the kickdown switch (S16/6) is not applicable. The function is taken over phased in from the accelerator pedal sensor (B37). | 21F |
W9 | Ground (at left headlamp unit) | 33L |
W16/3 | Ground (output ground - component compartment - left) | 21G |
W16/4 | Ground (output ground - component compartment - right) | 21G |
W16/5 | Electronics ground (left of component compartment) | 5E |
W16/6 | Electronics ground (right of component compartment) | 5E |
X11/4 | Data link connector | 26L |
X25/4 | Fuel tank (pressure, activated charcoal filter) connector | 17G |
X25/9 | Activated charcoal filter connector | 17J |
X35/56 | O2 sensor connector | 13G |
X63/4 | CAN databus adapter connector (2-pin) | 28L |
Y58/1 | Purge control valve | 16L |
Y58/4 | Activated charcoal filter shutoff valve | 18L |
Z7/36z1 | Circuit 87M2Me connector sleeve | 3E |