Wiring diagrams
The wiring diagrams are assigned to the familiar function groups 00-91. The systems are listed alphabetically with an indication of the function group/ function subgroup in the "Search aid for all wiring diagram groups"
OV00.01-S-1901VAA or A3 (hard copy) the systems are listed alphabetically with specification of function group/
function subgroup.
The wiring diagrams are filed in the respective function group arranged according to the PE number,
e.g.: PE07.16-S-2000VAA
PE07.16-S-2000IVAB
To check the completeness of the volume the sequence of the wiring diagrams filed can be seen from the lists of contents of the respective function group. For supplements the wiring diagrams should be filed as per the supplement sheet.
e.g.: PE00.19-P-1100VAA Overview of wiring diagrams....
-----------------------------------------------------------------------------------------
The wiring diagrams are prepared as function schematics or control unit diagrams and are built up as follows:
-Function schematics
The control units and electrical components belonging to the function are shown as symbols. The functional connections are realized by direct lines or by the data bus.
-Control unit diagrams
Control units are represented complete with all connected components. The feed of the control units appears first.
The wiring diagrams also contain linkages of possible versions and functions.
Linkages, recognizable as versions, are framed and provided with an abbreviated designation/ abbreviation.
The versions are designated with 1and 2
-----------------------------------------------------------------------------------------
Notes on the accompanying documents for connectors/ terminal blocks (B1)
Special equipment (SA) is specifically highlighted in the notes column. For connectors, which are installed in special equipment, the special equipment is specified in the notes column in the row in front of the connector designation. For connectors, which are installed as standard, special equipment specification is noted directly at the respective jack and/or connector.
The feed of the terminal blocks is shown by means of an arrow pointing to the left, the outputs by means of arrows pointing to the right. The grouping of the individual variants/special equipment (SA) is highlighted by means of broken lines. All outputs to components, which are installed as standard, are listed up to the first broken line.
The versions identified with the abbreviated designation "U..." are listed in the legends. Explanations regarding identifications of versions with abbreviations such as ESP can be found in the section "Abbreviations for Workshop Literature".
OV00.01-S-1001-27VAA *(A4)
The signal and circuit designations used are explained in "as abbreviations of signal and circuit designations for wiring diagrams" OV00.01-S-1001-28VAA *(A5).
Wire cross-sections may differ from that shown in the wiring diagrams.
P00.19-0401-01
Wiring daigram number
a Information type
b Function group
c Function subgroup
d Producer ID
e Sequence number
f Information unit number
g Validity letter (s)
P00.19-0402-01
Connection designation
a Component
b Clutch
c Socket
P00.19-0403-01
Wire designation
a Conductor cross-section in mm2
b Basic color
c Identification color
P00.19-0404-01
Identification of truncated wires
a Component to which the truncated electric line leads
b Connection designation on component
P00.19-0405-01
Fuse blocks
a Receptacle numbering, output (A, B, C or D)
b Line bridge
c Terminal designation
d Fuse rating in amp(s)
e Receptacle numbering, input (E)
f Fuse number
P00.19-0406-01
Components and switches
a Component which are not represented completely are shown dismantled.
b Switching contacts are shown in the rest position.
P00.19-2088-01
a Illustration of a function-specific component with connection designation and corresponding line
b Illustration of a function-independent component connection with corresponding line
P00.19-2089-01
Looped lines
a Function-specific components
b The looped line connects two function-specific components across one or more function-independent component connections.
P00.19-2090-01
Indirect line (only for terminal 31 or terminal 58)
a Function-specific component
b Indirect line for more than two intermediate function-independent component connections/ loops.
c Connection to either terminal 31 or terminal 58
P00.19-2094-01
Installation date
a Installation of a component up to date
b Installation of a component as of date
Wire colors:
BK = black = black
BN = Brown = brown
BU = blue = blue
GN = green = green
GY = gray = gray
OG = orange = orange
PK = pink = pink
RD = red = red
TR = transparent = transparent
VT = violet = violet
WH = white = white
YE = yellow = yellow
The symbol refers to further wiring diagrams or function schematics.
The feed-in of the Z connector sleeves is indicated by an arrow to the left, the outputs by arrows to the right as follows:
G1 Battery +
N3/10 Control unit ME-SFI 1/10
Special features in WIS presentation
In contrast to the presentation on paper, it is possible in the WIS to select certain areas (framed in red) and thus to jump to other documents or wiring diagrams.
- Selection of connectors Document: Location and assignment of connectors
- Selection of ground points Document: Location and assignment of ground points
- Selection of Z connector sleeves Document: Location and assignment of Z connector sleeves
- Selection of wiring diagram hands Reference to further wiring diagrams
- Selection of document:
Component designations Abbreviations of signal and terminal designations