GF83.70-W-4029C | Burner insert with afterburner pipe, location/task/design | 27.1.98 |
MODELS 950, 952, 953, 954
with CODE (H60) Warm air heater "Eberspächer D1 LP"
with CODE (H62) Warm air heater "Eberspächer D3 LP"
MODELS 970, 972, 974, 975, 976
with CODE (H60) Warm air auxiliary heater "Eberspächer" D1 LP
with CODE (H62) Warm air auxiliary heater "Eberspächer" D3 LP
MODELS 375.4, 944 with CODE (H60) Warm air heater "Eberspächer D1 LP"
W83.70-0172-06
8 Burner insert
10 Afterburner pipe
11 Heat exchanger
Burner insert with afterburner pipe location | The burner insert (8) with pushed-on afterburner pipe (10) is located in the heat exchanger (11). The glow plug chamber is directly connected to the combustor via an opening in the burner insert (8). | ||
Burner insert with afterburner pipe, task | An ignitable air-fuel mixture is produced in the burner insert (8). The air-fuel mixture ignites automatically after the start phase at the hot burner insert (8). The main combustion of the air-fuel mixture takes place in the afterburner pipe (10). | ||
Burner insert with afterburner pipe design | The afterburner pipe (10) is pushed onto the sheet metal housing of the burner insert (8). |