Air conditioner housing, basic function

Typ gf · téma 83.40 · verze 0101 · 2018-09-28

Platí pro: Model all (CAR)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.40 Automatická klimatizace — Řada 900 (modely 9**) · Řada 902 (modely 9**) · Řada 904 (modely 918, 919, 924, 925, 938, 943, 957) · Řada 906 (modely 917, 918, 924, 953)

Platí také pro motory/převodovky: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

GF83.40-P-2015A

Air conditioner housing, basic function

19.09.2018

Model

all (CAR)

P83.40-5552-09

Shown on 2-zone automatic climate control

1	Central air distribution actuator motor	8	Evaporator temperature sensor
2	Activated charcoal fine particle filter	9	Blending air flap actuator motor
3	Fresh air/air recirculation flap actuator motor	10	Blending air flap
4	Fresh air/recirculated air flap	11	Heating system heat exchanger
5	Blower	12	PTC heater booster
6	Blower regulator	13	Air distribution flap
7	Evaporator

 Depending on the vehicle model and the equipment installed, additional actuator motors and air flaps may be located in the air conditioner housing and in the air ducts under the center console.

General

The components of the climate control system, which are responsible for air delivery, filtering and temperature control, are located in the air conditioner housing.

Location

The air conditioner housing is located between the instrument panel and the firewall.

Function requirement

 Circuit 30t ON