Shown on model 447.7 |
N41 | Becker® MAP PILOT control unit |
N41-1 | Becker® MAP PILOT control unit mount |
S82.85-4550-06
Location
The Becker® MAP PILOT control unit mount is located in the glove compartment.
Tasks
Connection of the Becker® MAP PILOT control unit (N41) to the vehicle
Receive signals
Transmitting signals
Connection of the Becker® MAP PILOT control unit to the vehicle
The Becker® MAP PILOT control unit can be connected via the Becker® MAP PILOT control unit mount. The Becker® MAP PILOT control unit must be inserted into the Becker® MAP PILOT control unit mount by the customer.
Receive signals
Receiving the power supply, circuit 30g and circuit 31
Receiving control signals over the telematics CAN (CAN A) by the radio (Audio) (N87/2) (with CODE EN7 (Audio 15))
Receiving global positioning system (GPS) signals via the GPS antenna (A2/48)
Receiving FM signals for Traffic Message Channel (TMC) from the FM, AM antenna (A2/51) via the FM, AM antenna amplifier (A2/18), the TMC antenna splitter (A28/13)
Transmitting signals
The Becker® MAP PILOT control unit mount sends signals from the Becker® MAP PILOT control unit to the radio (Audio):
Transmitting audio signals to the radio (Audio) via a direct line
Transmitting video signals to the radio (Audio) via a low voltage differential signal (LVDS) line
Becker® MAP PILOT control unit |
N41 | Becker® MAP PILOT control unit |
E | Unlocking pin |
S82.85-4548-05
The Becker® MAP PILOT control unit is ejected from the Becker® MAP PILOT control unit mount by pressing the release pin.
The release pin can be removed. The release pin can be ordered as a replacement part via Mercedes-Benz Accessories.