gf8262p5010fg

Component description for sound system amplifier control unit

Typ gf · téma 82.62 · verze 0105 · 2019-10-19

Platí pro: Model 213 with code 810 (Premium sound system) except code 811 (High-End sound system)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.62 Reproduktory, zesilovač, anténa — Řada 213

GF82.62-P-5010FG

Component description for sound system amplifier control unit

17.10.2019

Model

213

with code 810 (Premium sound system)

except code 811 (High-End sound system)

Component description for sound system amplifier control unit

Shown on model 213.0

N40/3

Sound system amplifier control unit

P82.62-4324-06

Location

The sound system amplifier control unit is located in the trunk on the left behind the side panel on a major assembly carrier.

Tasks

The sound system amplifier control unit has the following tasks:

Receive signals

Signal optimization and amplification

Transmitting signals

Receive signals

The input factors are read in via:

Media Oriented System Transport (MOST)

Direct lines

Media Oriented System Transport (MOST)

The sound system amplifier control unit is a MOST subscriber and receives control and audio signals from the following components:

Control and audio signals from the head unit (A26/17)

Audio parameters (e.g. volume, sound) from the head unit

Control and audio signals from the tuner unit (A90/4) (with code 536 (SIRIUS satellite radio), with code 537 (Digital radio (DAB)) and with code 522 (Audio 20 radio))

Control and audio signals from the TV tuner control unit (N143) (with code 865 (TV tuner) and code 531 (COMAND APS))

Interior noise level signals from the driver hands-free system microphone (B25/20) and from the front passenger hands-free system microphone (B25/21) via the head unit for the speed-dependent volume control (SDV [GAL])

Speed signal from the head unit for the speed-dependent volume control (SDV [GAL])

Direct lines

The following signals are read in via a direct line:

Power supply via circuit 30T and circuit 31

Audio muting (mute line) from the HERMES control unit (N112/9) (with code 360 (HERMES UMTS) or with code 362 (HERMES LTE))

Electrical wake-up

Signal optimization and amplification

Optimize the input signals by digital signal processing and Surround Sound

Support of stereo and multichannel entertainment channels and announcement channels (e.g. for voice output in voice control system or navigation instructions)

Amplifying of the input signals and assignment of the output to the speakers

Transmitting signals

The sound system amplifier control unit emits the audio signals at the following speakers:

Left front door midrange speaker (H4/1) and right front door midrange speaker (H4/2)

Left rear door midrange speaker (H4/3) and right rear door midrange speaker (H4/4)

Center instrument panel speaker (H4/27)

Left front door tweeter (H4/33) and right front door tweeter (H4/34)

Left rear door tweeter (H4/35) and right rear door tweeter (H4/36)

Left front footwell woofer (H4/42) and right front footwell woofer (H4/43)

Left rear surround sound system midrange speaker (H4/62) and right rear surround sound system midrange speaker (H4/63)

Function

The sound system amplifier control unit is actuated via the head unit. The head unit also provides all of the menus for user guidance. The software update and diagnosis communication also occur via the head unit.

For the optimized SDV [GAL], the sound system amplifier control unit evaluates the speed signal and noise level in the vehicle interior via the driver hands-free system microphone and front passenger hands-free system microphone.

Sound amplifier control unit wiring diagram

PE82.62-P-2101-97DBA