gf8230p4007a

Function of braking wiper motor

Typ gf · téma 82.30 · verze 0101 · 1999-11-08

Platí pro: MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 (except 210.081 /281) as of 1.3.97

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.30 Stírače — Řada 202 · Řada 208 · Řada 210 (modely 003, 004, 006, 007, 010, 015, 016, 017, 020, 025, 026, 035, 037, 045, 048, 053, 055, 061, 062, 063, 065, 070, 072, 074, 081, 082, 083, 206, 210, 215, 216, 217, 225, 226, 235, 237, 245, 248, 261, 262, 263, 265, 270, 272, 274, 281, 282, 283, 606, 610, 616, 617, 663)

GF82.30-P-4007A

Function of braking wiper motor

14.12.96

MODEL 202 as of 1.6.97,
208, 210.081 /281,
210 (except 210.081 /281) as of 1.3.97

If a wiping operation is to be completed properly, the wiper arm must stop in the rest position. For this purpose the signal acquisition and actuation module (SAM) (N10/1) reads in the status of the cam switch. The cam switch is actuated as it moves passed the rest position. The SAM switches off the relay and

-----------------------------------------------------------------------------------------

brakes the wiper motor (M6/1) by short circuiting via an electronic circuit.

If circuit 15R is switched off before reaching the rest position,
the motor stops immediately.

-----------------------------------------------------------------------------------------

Wiper motor

GF82.30-P-4104A

Odkazované dokumenty