GF82.30-P-0005A | Function of windshield wiper system | 3.2.97 |
MODEL 202 as of 1.6.97,
208, 210.081 /281,
210 / (except 210.081 /281) as of 1.3.97
P82.30-0309-06
Interlinkage of components
B38 Rain sensor (with code 345 only)
K40/2 Driver-side fuse and relay module
K40/2k1 Wiper stage 1 relay
K40/2k2 Wiper stage 2 relay
K40/2k3 Windshield washer relay
M5/1 Windshield washer pump
M6/1 Wiper motor
N10/1 Driver-side signal acquisition and actuation module (SAM)
N73 Electronic ignition switch (EIS) control module
S4 Combination switch
Prerequisite for all windshield wiper functions:
Circuit "15R ON"
Function
The windshield wiper system is controlled with the combination switch (S4).
The following functions can be selected by turning the switch:
Wiping with low speed (stage 1) or high speed (stage 2).
Intermittent wiping, with rain sensor (code 345) installed
-----------------------------------------------------------------------------------------
with automatic interval control.
When the switch is pressed in the direction of the steering column:
Press to pressure point (wipe once): Wiping without washing.
Pressing beyond pressure point: Front window is washed with water. Model 202: When the headlamps are switched on the headlamp cleaning system (HCS) is also actuated.
-----------------------------------------------------------------------------------------