gf8020p3012a

Open trunk lid with interior switch function

Typ gf · téma 80.20 · verze 0104 · 2001-07-05

Platí pro: MODELS 202 as of 1.6.97, 208, 210.081 (except 208.4), 210 (except 210.2 /081) as of 1.3.97

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 80 Centrální zamykání, komfortní ovládání, systémy oprávnění k jízdě › 80.20 Centrální zamykání, vnitřní centrální zamykání — Řada 202 · Řada 208 (modely 3**) · Řada 210 (modely 003, 004, 006, 007, 010, 015, 016, 017, 020, 025, 026, 035, 037, 045, 048, 053, 055, 061, 062, 063, 065, 070, 072, 074, 081, 082, 083, 606, 610, 616, 617, 663)

GF80.20-P-3012A

Open trunk lid with interior switch function

2.1.97

MODELS 202 as of 1.6.97,
208, 210.081 (except 208.4),
210 (except 210.2 /081) as of 1.3.97

Open trunk lid with interior switch function

P80.20-0421-06

Trunk lid remote control networking

1 Transmitter key

2 Antenna

3 Pneumatics actuator for trunk lid

A26/1 Infrared remote control (RCL) receiver, driver's door

A26/2 Infrared remote control (RCL) receiver, front passenger's door

A37 PSE control module (combined)

CAN Controller area network

N69/1 Driver-side front door control module

N69/2 Passenger-side front door control module

N70 Overhead control panel control module

N72 Lower control panel control module

N72s15 Remote trunk lid release switch

N73 Electronic ignition switch (EIS) control module

S15/1 Trunk lid release switch

S17/8 Trunk lamp switch

Illustrated on the model 210 sedan

The trunk lid remote control switch (N72s15) is used to open the trunk lid from inside the vehicle.

Function requirements

The trunk lid remote control switch (N72s15) function is enabled by the lower control control panel control module (N72),

the emergency opening function is triggered

by unlocking the vehicle using the transmitter key,

by unlocking the vehicle using the lock switches (only ,),

by unlocking the vehicle using the interior central locking switch (S6s1) if it was previously locked automatically or with the switch (S6s1),

the transmitter key is inserted into the ignition lock after locking the vehicle with the transmitter key.

The switch function is blocked by the lower control panel control module (N72), if

the automatic lock function is triggered

the vehicle is locked using the transmitter key or the interior central locking switch (S6s1),

the vehicle is locked using the lock switches (only ,).

Operational sequence

Actuation of the trunk lid remote control switch (N72s15) is detected by the lower control panel control module (N72). If the switch function has been enabled, then the lower control panel control module (N72) sends the command to open the trunk lid over the CAN to the pneumatic system equipment (PSE) (A37). The PSE opens the trunk lid pneumatically if the trunk lock has not been locked through the lock cylinder being set to the 90° position.

Open trunk lid pneumatically

GF80.20-P-4016A

Emergency opening

GF80.20-P-4013A

Automatic locking

GF80.20-P-4009A

Trunk lid status indicator

GF80.20-P-4015A

Pneumatic system equipment (PSE), position/task/design/function

GF80.20-P-4106A

Trunk lid remote control switch, position/task/design/function

GF80.20-P-4104A

Odkazované dokumenty