Convenience opening, power windows, function

GF72.29-P-3004S

5.3.98

MODEL 215, 220

Function prerequisites

 Voltage not too low or too high and

 All doors closed (status: unlocked) and

 Ignition starter key in position "0" or removed and

 "Unlock" button on remote control key (A8/1) pressed for longer than 1 s (,  : key in "unlock" position)

Function

The affected control modules (model 220: N69/1, N69/2, N69/3, N69/4; model 215: N69/1, N69/2 and N22/6) receive the signal/CAN message for convenience opening and then actuate the corresponding power window motors (M10/3, M10/4, M10/5, M10/6). The motors are actuated as long as the button on the remote control key is pressed, however, max. 25 s.

The power window convenience opening feature functions even when the windows are not synchronized.

The convenience opening feature is interrupted when

 the request via CAN bus is no longer received or

 the function prerequisites specified above are no longer fulfilled.

 Moreover, when the convenience opening feature is actuated the sliding roof is opened and the seat ventilation (special equipment) is switched on.

Convenience feature (CF), function		GF80.45-P-0003S
Convenience closing, power windows, function		GF72.29-P-3005S
Power window synchronization, function		GF72.29-P-4003S
Front driver-side door control module, location/purpose/design/function		GF72.29-P-4105S
Front passenger-side door control module, location/purpose/design/function		GF72.29-P-4106S
Rear door control module, location/purpose/design/function	Only model 220	GF72.29-P-4102S
Rear control module, location/purpose/design	Only model 215	GF91.29-P-2111A

Odkazované dokumenty