Refer the following table for removal of sensors from engine |
S.No | Name | Location | Tools used |
1 | Coolant temperature sensor | Near 3rd and 4th unit pump center | 22 mm open-end spanner |
2 | Fuel temperature sensor | 1st unit pump | 22 mm open-end spanner |
3 | Oil pressure sensor | Near oil filter | T30 torx screwdriver |
4 | Crank position with O-ring sensor | Flywheel housing | Free hand |
5 | Cam position with O-ring sensor | Flywheel housing | Free hand |
6 | Boost pressure sensor | Intake manifold | 10 mm hexagonal socket |
7 | Oil level sensor | Oil sump | 27 mm open-end spanner |
8 | Fuel metering unit | Engine rear lifting hook | 22 mm and 27 mm open-end spanner |