Shown: model 172.4 up to 29.02.2016 with code 512 (COMAND APS with DVD changer) |
A40/8 | Audio/COMAND display |
P82.87-6492-06
Location
The Audio/COMAND display is fitted to the top center of the instrument panel.
Tasks
Map data, operating data and information data are displayed on the Audio/COMAND display; the Audio/COMAND display thus fulfills the following additional tasks:
Reading in of signals
Evaluation of input factors
Reading in of signals
The input factors are read in over the following connections:
Telematics CAN (CAN A)
LVDS connection (low voltage differential signal)
Telematics CAN
The Audio/COMAND display receives control signals (e.g. brightness, on or off display) over the telematics CAN.
LVDS connection
The Audio/COMAND display receives all of the information required display the content from the audio equipment via the LVDS interface.
Evaluation of input factors
The input factors are evaluated by the integrated microprocessor and the relevant components are then actuated internally.
Variants
As of 01.03.2016, a permanent 7"̋-TFT color screen will be installed.
Up to 29.02.2016, differentiation can be made between the variants "ENTRY" and "High" as follows:
"ENTRY" variant (on code 510 (Audio 20 CD with CD changer, 6-disk) or with code 523 (Audio 20 CD)):
Permanent 5.8"̋-TFT color screen
400240 pixel resolution
"High" variant (with code 527 (COMAND APS with single DVD drive (with navigation)) or code 512 (COMAND APS incl. DVD changer)):
Permanent 7"̋-TFT color screen
800480 pixel resolution