15.03.07 | The document has been updated to this date and will no longer be subject to revision. |
P47.10-0379-06
Design
77 Activated charcoal canister with connections
77/1 Fuel tank ventilation
77/2 Regeneration connection
77/3 Air admission line for diaphragm pressure regulator
76/1 Vent line with valve
77/4 Air admission or to activated charcoal canister shutoff valve
80 Fuel tank
80/2 Tensioning straps
80/17 Fuel delivery module
80/18 Longitudinal struts for tensioning straps
80/19 Mounting screw
90/11 Fuel return line
90/12 Fuel pressure line
B4/3 Fuel tank pressure sensor
Fuel tank position | The fuel tank (80) is attached on the left ahead of the rear axle between propshaft and frame by means of tensioning straps. | ||
Fuel tank design | The fuel tank (80) is manufactured from a gas-tight plastic. A valve with vent line (76/1) is positioned at the highest point. The activated charcoal canister (77) is positioned at the side. as of 7/01: Volume enlarged to 83 liters | ||
Fuel tank function | The fuel is drawn out of the fuel tank through a fuel strainer by the fuel delivery module (80/17). The fuel from the return flow line flows back into the fuel delivery module. The valve (rollover) prevents fuel flowing out along the vent line in the event of an accident or rollover. | ||
Fuel delivery module location/task/design/function | Model Series 163 | ||
Vent valve, location/task/function | Model 129, 163, 170, 210, 215, 220, 230, 240 except |