gf4615p1000b

Steering column adjustment, basic function

Typ gf · téma 46.15 · verze 0104 · 2020-06-23

Platí pro: Model all (CAR)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 46 Řízení › 46.15 Nastavování sloupku řízení — Řada 900 (modely 9**) · Řada 902 (modely 9**) · Řada 904 (modely 918, 919, 924, 925, 938, 943, 957) · Řada 906 (modely 917, 918, 924, 953)

Platí také pro motory/převodovky: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

GF46.15-P-1000B

Steering column adjustment, basic function

22.06.2020

Model

all (CAR)

Overview

This document contains information on:

General

Function

General

The steering column adjustment is available in combination with an electrically adjustable driver's seat with memory function. This enables various steering column positions to be adjusted and stored.

The easy entry and exit function allows the driver to get in and out of the vehicle easily. The steering column is adjusted and the current position of the steering column is stored by the driver seat control unit.

Function

Normalizing

Normalization is the basis for assigning the current position of the steering column. The position of the steering column is recorded by the driver seat control unit. Normalization takes place during commissioning or in a denormalized state. For this purpose, the steering column's front and top mechanical end stop must be moved to. Normalization is performed during initial startup using XENTRY Diagnosis.

After denormalization, normalization takes place using the adjustment function. To do so, continue to press and hold down the steering column adjustment switch for a short moment after reaching the mechanical end stops. Normalization resets the location counter in the driver's seat control unit to zero. During steering column adjustments, the driver seat control unit records the adjustment range of the steering column through a Hall sensor.

Adjust steering column

The "Adjust steering column" function makes it possible to adjust the steering column into various positions.

The steering column is adjusted by operating the steering column adjustment switch. Actuation takes place as long as the steering column adjustment switch is operated or until an end position is reached.

Save position of steering column

The current position of the steering column can be stored together with the position of the driver seat and the outside mirrors. It is stored using the left front seat adjustment switch group.

Call up stored position of steering column

To move to a stored position, the corresponding switch 1, 2 or 3 must be pressed until the stored position of the steering column is reached. Releasing the switch causes the adjustment procedure to be aborted immediately.

Further basic functions

Memory function, basic function

Model all (CAR)
with code 241 (Left electric adjustable driver's seat with memory)
Model all (CAR)
with code 242 (Electrically adjustable front seats)
Model all (CAR)
with code 242 (Right electric adjustable driver's seat with memory)
Model all (CAR)
with code 275 (Driver's seat, electrically adjustable with memory function)
Model all (CAR)
with code 275 (Memory Package (driver's seat, steering column and mirror))
Model all (CAR)
with code 276 (Memory feature in rear)

GF91.10-P-9901A

Odkazované dokumenty