gf4245p000104pp

Electronic stability program (ESP), driver information

Typ gf · téma 42.45 · verze 0102 · 2008-03-25

Platí pro: MODEL 203 with CODE (472) Electronic Stability Program (ESP) up to Model Year 8 MODEL 209 with CODE (472) Electronic Stability Program (ESP)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.45 Elektronický stabilizační systém (ESP), regulace stability (SR) — Řada 203 · Řada 209

EinPAS 26 Systémy aktivní bezpečnosti › 26.20 Regulace brzd/ trakce › 26.20.1 Základní informace — Řada 203 · Řada 209

GF42.45-P-0001-04PP

Electronic stability program (ESP), driver information

Model 203, 209

Electronic stability program (ESP), driver information

P54.30-3330-09

Shown on model 203

A1 Instrument clusterA1

A1e41 ESP warning lamp

A1p13 Multifunction display

h Warning symbol for malfunctions

A1e7 Low brake fluid level and parking brake indicator lamp

A1e17 ABS indicator lamp

Driver information

Low brake fluid level and parking brake indicator lamp (A1e7)

This lamp is activated if the parking brake is not released when driving or the brake fluid is below the minimum level.

ABS malfunction indicator lamp (A1e17)

This lamp is actuated when there is a fault in the ABS system. The signal for actuating the lamp comes over the engine compartment CAN from the ESP and BAS control module (N47-5).

ESP warning lamp (A1e41)

This lamp is actuated whenever the system intervenes in the driving situation.

The signal for actuating the lamp comes over the engine compartment CAN from the ESP and BAS control module (N47-5).

The driver is alerted to the ESP intervention by the ESP warning lamp (A1e41) in the instrument cluster. The information through the steering wheel and brake pedal reaction is so limited that it does not distract the driver, who is already highly tense on having reached the critical handling limits.

The warning lamp flashes in the event of:

Active intervention by the brake system during acceleration or deceleration

Reduction of engine torque

Reactions in the event of failure of individual components and displays in the instrument cluster (see table below)

Condition 1:

System fully operational

Condition 2:

Fault in ESP, but ASR and ABS still fully operational

Condition 3:

Fault in ASR (of necessity ESP must also be shut down), but ABS still fully operational

Condition 4:

Fault in ABS (of necessity ESP, ASR and BAS must also be shut down), no systems operational

Operating condition

Driving status

ESP OFF switch

ESP warning lamp

ABS indicator lamp

Display

Condition 1

ASR/ESP not active

not actuated

OFF

OFF

OFF

System fully operational

actuated

constantly on

OFF

OFF

ASR/ESP not active and driver braking

not actuated

OFF

OFF

OFF

ASR/ESP not active and driver braking

actuated

constantly on

OFF

OFF

ASR/ESP active

not actuated

flashing

OFF

OFF

ASR/ESP active and driver braking

not actuated

OFF

OFF

OFF

ESP active and driver braking

actuated

constantly on

OFF

OFF

Condition 2

During a driving condition in ESP condition 1 with the ESP OFF switch actuated, ESP switches to malfunction

was actuated, is deactivated with ESP indicator lamp/display

was constantly on or flashing, is switched off with ESP indicator lamp/display

OFF

on

Fault in ESP, but ASR and ABS still fully operational

ASR not active

switch is no longer taken into account

OFF

OFF

on

ASR not active and driver braking

switch is no longer taken into account

OFF

OFF

on

ASR active

switch is no longer taken into account

off; warning lamps no longer actuated

OFF

on

ASR active and driver braking

switch is no longer taken into account

OFF

OFF

on

Condition 3

No driving status recognition

---------------

OFF

OFF

on

ESP/ASR

failure

Condition 4

No driving status recognition

---------------

OFF

on

on

Total failure