gf3310p3000avi

4MATIC front axle transmission, function

Typ gf · téma 33.10 · verze 0101 · 2017-05-22

Platí pro: Model 217, 222 with transmission 725.0 (except 725.096)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 33 Přední náprava › 33.10 Přední náprava kompletní — Řada 217 · Řada 222

Platí také pro motory/převodovky: 725 001, 725 004, 725 005, 725 007, 725 008, 725 011, 725 014, 725 015, 725 017, 725 018, 725 019, 725 021, 725 025, 725 031, 725 034, 725 035, 725 037, 725 038, 725 044, 725 045, 725 047, 725 048, 725 051, 725 054, 725 055, 725 058, 725 066, 725 081, 725 085, 725 091, 725 095, 725 099

GF33.10-P-3000AVI

4MATIC front axle transmission, function

15.05.2017

Model

217, 222 with transmission 725.0 (except 725.096)

4MATIC front axle transmission, function

Sectional view of front axle transmission

1

Propeller shaft flange

2

Drive pinion

3

Ring gear

4

Differential

5

Right front axle shaft

6

Intermediate shaft (for left front axle shaft)

7

Front axle differential carrier

P33.30-2145-76

Front axle transmission 4MATIC, general

The front axle transmission is designed as a single-speed differential (4) with fuel-efficient technology (fuel economy). The housing of the front axle transmission is made of aluminum and bolted to the oil pan of the engine by means of a carrier (7). The drive pinion (2) is at an angle of 83° to the ring gear (3) so as to adjust the angular course of the propeller shaft relative to the front axle transmission. The ring gear (3) is attached on the engine side and bolted to the differential housing of the differential (4). This location of components of the front axle transmission causes the change in direction of rotation, which occurs due to the single-speed front axle transmission output in the transfer case, to reverse again.

Overview of system components, automatically controlled all-wheel drive (4MATIC)

GF28.00-P-9998AVI

Odkazované dokumenty