gf3020p4013e

Pedal value sensor characteristic curve when reversing function

Typ gf · téma 30.20 · verze 0119 · 2008-03-17

Platí pro: ENGINE 104.943 /944 /991 /994 as of 1.8.96 ENGINE 104.995 with CODE (494) USA version with CODE (807) Model year 1997 with CODE (808) Model year 1998 with CODE (498) as of Model Year 97 Japan version ENGINE 104.941 as of 1.8.96 ENGINE 111.921 /942 as of 1.9.98, 111.946 as of 1.6.98, 111.944 /975 as of 1.8.96, 111.943 /947 /952 /956 /957 /958 /973 /974 /982 /983 ENGINE 111.945 in MODEL 202.020 /080 as of 1.9.98, 208.335 /435 as of 1.6.98 with CODE (494) USA version with CODE (807) Model year 199

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 30 Regulace, rychlostní regulace › 30.20 Elektronický plynový pedál (EFP) / tempomat (TPM) / regulace volnoběhu (LLR) — Řada 202 (modely 020, 080) · Řada 208 (modely 335, 435)

Platí také pro motory/převodovky: 104 941, 104 943, 104 944, 104 991, 104 994, 104 995, 111 921, 111 942, 111 943, 111 944, 111 945, 111 946, 111 947, 111 951, 111 952, 111 955, 111 956, 111 957, 111 958, 111 973, 111 974, 111 975, 111 982, 111 983, 112 910, 112 911, 112 912, 112 913, 112 914, 112 916, 112 917, 112 920, 112 921, 112 922, 112 923, 112 940, 112 941, 112 942, 112 943, 112 944, 112 946, 112 947, 112 949, 112 953, 112 954, 112 955, 112 970, 112 972, 112 973, 112 975, 113 940, 113 941, 113 942, 113 943, 113 948, 113 960, 113 961, 113 963, 113 965, 113 966, 113 967, 113 968, 113 969, 119 980, 119 981, 119 982, 119 985, 120 982, 120 983, 137 970

GF30.20-P-4013E

Pedal value sensor characteristic curve when reversing function

10.7.96

ENGINE 104.943 /944 /991 /994 as of 1.8.96

ENGINE 104.995
with CODE (494) USA version
with CODE (807) Model year 1997
with CODE (808) Model year 1998
with CODE (498) as of Model Year 97 Japan version

ENGINE 104.941 as of 1.8.96

ENGINE 111.921 /942 as of 1.9.98,
111.946 as of 1.6.98,
111.944 /975 as of 1.8.96,
111.943 /947 /952 /956 /957 /958 /973 /974 /982 /983

ENGINE 111.945
in MODEL 202.020 /080 as of 1.9.98,
208.335 /435 as of 1.6.98
with CODE (494) USA version
with CODE (807) Model year 1997
with CODE (808) Model year 1998

ENGINE 112.910 /911 /912 /913 /914 /916 /917 /920 /921 /922 /923 /940 /941 /942 /943 /944 /947 /949 /954 /955 /970 /972 /975

ENGINE 113.940 /941 /942 /943 /948 /960 /961 /965 /966 /967 /968 /969

ENGINE 119.980 /981 /982 /985

ENGINE 120.982 /983

ENGINE 137.970

ENGINE 111.951 /955 up to Model Year 8

ENGINE 112.946 /953 /973 up to Model Year 8

ENGINE 113.963 up to Model Year 8

Pedal value sensor characteristic curve when reversing function

P30.20-0222-05

B37 Accelerator pedal sensor

M16/1 Actuator EFP/TPM/LLR
(further designation:
M16/6 Throttle valve actuator)

N3/10 Motor electronics control unit

N15/3 ETC control unit

(with automatic transmission)

S16/2 Backup lamp switch

(with manual transmission)

CAN Data bus

Task

Optimizing driving comfort and safety when reversing.

Design/function

The pedal value sensor charcteristic curve is changed if reverse travel is recognised by the ME control unit. The throttle valve opens more slowly. The entire opening angle in this case is approx. 50%.

Reversing is detected:

if a manual transmission fitted, the ME control unit is connected parallel to the reversing light switch.

if an automatic transmission is fitted, the information is supplied over the CAN by the ETC control unit.

Motor electronics control unit, location/task/design/function

other than engine 111 EVO

GF07.61-P-5000F

Engine 111 EVO

GF07.61-P-5000GS

Pedal value sensor, location/task/design/function

GF30.20-P-4011L

Electronic accelerator/cruise control/idle speed control actuator location/task/design/function

GF30.22-P-4010F

Throttle valve actuator, location/task/design/function

Engine 111 EVO

GF30.22-P-4101GS

ETC control unit, location/task

Information on selector lever position P/N and gear engaged in the case of automatic transmission.

Transmission 722.6

GF27.19-P-4012G

Odkazované dokumenty