gf2655s3004a

Lubrication, function

Typ gf · téma 26.55 · verze 0102 · 1999-06-25

Platí pro: ENGINE 601, 111.948 /978 in MODEL 638 except CODE (G40) Automatic transmission

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 26 Mechanická převodovka › 26.55 Chlazení převodového oleje, olejové čerpadlo — Řada 601 · Řada 638

Platí také pro motory/převodovky: 111 948, 111 978

GF26.55-S-3004A

Lubrication, function

24.8.95

ENGINE 601, 111.948 /978 in MODEL 638 except CODE (G40) Automatic transmission

Lubrication, function

S26.55-3000-06

Composition

1 Lubrication groove (primary shaft)

2 Lubrication groove (primary shaft)

3 Oil duct (primary shaft)

4 Oil duct (primary shaft)

Work

Wheel, bearing and differential oil supply

Function

The lubrication of the gearbox is kept constant by immersion in the oil and by the bubbling created.

The bubbling created fills the lubrication ducts (1,2). Duct (1) joins the primary shaft support ball bearings and the gear wheel bearings.

Duct (2) joins the support ball bearings of the secondary shft and of the gear wheels.

To distribute the oil there are also ducts in the primary and secondary shafts, through the outer cap.

The bearings of the primary shaft are greased by bubbling and by means of the movement the casing ribs generate in the oil.

The bearings of the secondary shaft are greased by bubbling.

After defining the ribs and the ducts, they transport the oil to grease the bearings of the wheel and the reverse shaft.

The reverse shaft bearing is greased by bubbling.

The differential is submerged in the oil.