gf1840b1200a

Location/task of the oil pressure sensor

Typ gf · téma 18.40 · verze 0100 · 2016-02-12

Platí pro: ENGINE 904.9, 924.9 in MODEL 368.0/1 ENGINE 906.9 in MODEL 368.0/1, 382.1ENGINE 926.9 in MODEL 368.0/1, 382.1, 634.001

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 18 Mazání motoru, chlazení motorového oleje › 18.40 Snímač hladiny oleje, snímač tlaku oleje — Řada 368 (modely 002, 004, 006, 052, 054, 100, 104, 106, 112, 115, 117, 150, 154, 185, 187) · Řada 382 (modely 111, 123, 171, 175, 176, 177, 184, 185, 186, 188, 189) · Řada 634 (modely 001) · Řada 904 · Řada 906

EinPAS 15 Motor › 15.20 Soustava mazání motoru › 15.20.12 Snímač/spínač/kabelový svazek — Řada 368 (modely 002, 004, 006, 052, 054, 100, 104, 106, 112, 115, 117, 150, 154, 185, 187) · Řada 382 (modely 111, 123, 171, 175, 176, 177, 184, 185, 186, 188, 189) · Řada 634 (modely 001) · Řada 904 · Řada 906

Platí také pro motory/převodovky: 924 ***, 926 ***

GF18.40-B-1200A

Location/task of the oil pressure sensor

12.02.16

ENGINE 904.9, 924.9 in MODEL 368.0/1

ENGINE 906.9 in MODEL 368.0/1, 382.1

ENGINE 926.9 in MODEL 368.0/1, 382.1, 634.001

Location/task of the oil pressure sensor

B18.40-0007-11

Represented on engine 926.9

10B16 Oil pressure sensor

Arrangement of the oil pressure sensor

The engine oil pressure sensor (10B16) is located in the oil gallery, at engine block right side, below the oil cooler.

Function of the oil pressure sensor

The oil pressure sensor (10B16) records the engine oil pressure.

Operation of the oil pressure sensor

The engine oil pressure is recorded by the oil pressure sensor (10B16) which changes its output tension according to oil pressure. The sensor is supplied with 5 V tension, in case the engine oil pressure is below 6 bar (0.6 MPa), the sensor output tension will fall below 90% (4.5 V), the pressure will be normal when above 4.5 V, up to the 95% limit of the 5 V supply tension. The oil pressure sensor (10B16) is connected to the engine control module MR/PLD. The measuring value remains available through the engine CAN4 line to the vehicle control module FR, and through the vehicle CAN1 line to the other electronic systems.