Motor electronics (ME-SFI) fuel injection and ignition system control unit, input signals

P07.61-0570-09

Shown on engine 112

A1 Instrument cluster

A16g1 Knock sensor 1

(right side of engine)

A16g2 Knock sensor 2

(left side of engine)

B2/5 Hot film mass air flow sensor

(intake air temperature sensor integrated)

B4/3 Fuel tank pressure sensor 

B6/1 Camshaft Hall sensor

B11/4 Coolant temperature sensor

B28 Pressure sensor (only ,
with cylinder shutoff
or with ME 2.8 as of 06/00)

B37 Accelerator pedal sensor

B40 Oil sensor
(oil level, temperature and quality)

G3/3 Left O2 sensor upstream of TWC

G3/4 Right O2 sensor, upstream of TWC

G3/5 Left O2 sensor downstream of
TWC

G3/6 Right O2 sensor downstream of
TWC

A Voltage supply,
circuit 87 and 30

Model 202, 208, 210:
K40/4 fuse and relay module
Model 215, 220, 230: K40/7 right fuse and relay module

Model 163: F1 fuse and relay module

Model 203, 209, 211: N10/1 Front SAM control unit with fuse and relay module.

Model 211: N10/1 Driver-side SAM control unit with fuse and relay module

CAN B Engine CAN

CAN C Interior CAN

L5 Crankshaft position sensor

M16/6 Throttle valve actuator

N3/10 ME-SFI [ME] control unit

N15/3 ETC (electronic transmission control) control unit (only AT)

N19 Air conditioning control and operating unit

N22 Automatic air conditioning (KLA) control and operating unit

N47-1 ASR/SPS [PML] control unit

N47-5 ESP / SPS <ESP / PML control unit

N54/1 DAS [FBS] control unit

N73 Electronic ignition switch control unit (with DAS 3)

S9/1 Stop lamp switch

S16/10 Gear recognition switch (voltage coded)

S40/3 Clutch pedal switch (MG)

S40/4 Variable cruise control (CC) switch
(: S40 Cruise control switch)