DFI inertia fuel shutoff mode function

GF07.13-P-3008C

19.6.95

ENGINE 602.982 in MODEL 210.017 /217 /617

P07.13-0333-76

Design

K40 Relay module (up to 02/97)

K40/4 Fuse and relay module (as of 03/97)

L5/6 Crankshaft position sensor

N3/8 DFI control module

R25/2 IFI/DFI accelerator pedal position sensor

Y23/3 DFI distributor-type injection pump

Y23/3k1 DFI fuel metering actuator

Y23/3l1 Slide valve actuator

	Task	Reducing the quantity injected to zero (zero delivery) during deceleration
	Function	The DFI control module (N3/8) detects the accelerator pedal position from the signal of the position sensor (R25/2) and the engine speed from the signal of the crankshaft position sensor (L5/6). In inertia fuel shutoff > 1500 rpm and accelerator not depressed the fuel metering actuator (Y23/3k1) is moved into the "zero delivery" position.
	Relay module (K40) position/design/task/function	up to 02/97	GF07.13-P-3101H
	Fuse and relay module (K40/4) position/task/function	as of 03/97	GF07.13-P-3141H
	DFI control module (N3/8) input signals/output signals/ position/task/function		GF07.13-P-3102C
	Crankshaft position sensor (L5/6) position/design/task/function		GF07.04-P-4116H
	Accelerator pedal position sensor (R25/2) design/task/function		GF07.04-P-5029H
	DFI distributor injection pump (Y23/3) task/design/function		GF07.02-P-5002C
	Fuel metering actuator (Y23/3k1) position/task/design/function		GF07.13-P-3160C