gf0704p4117ib

Camshaft Hall sensor, location/task/design/function

Typ gf · téma 07.04 · verze 0101 · 2008-03-27

Platí pro: ENGINE 611.961 as of 1.6.99 in MODEL 210.006 /007 /206 /606 ENGINE 611.962 in MODEL 203.004 /006 /204 /206 /706 up to Model Year 8 ENGINE 612.961 in MODEL 210.016 /216 /616 ENGINE 612.962 in MODEL 203.016 /216 up to Model Year 8 ENGINE 612.963 in MODEL 163.113 ENGINE 613.960 in MODEL 220.026 /026 /126 ENGINE 613.961 in MODEL 210.026 /226 ENGINE 612.990 in MODEL 203.018 /218 /718 up to Model Year 8 ENGINE 612.967 in MODEL 209.316

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.04 Snímače, čidla, senzory — Řada 163 (modely 113) · Řada 203 (modely 004, 006, 016, 018, 204, 206, 216, 218, 706, 718) · Řada 209 (modely 316) · Řada 210 (modely 006, 007, 016, 026, 206, 216, 226, 606, 616) · Řada 220 (modely 026, 126) · Řada 611 (modely 961, 962) · Řada 613 (modely 960, 961)

Platí také pro motory/převodovky: 612 961, 612 962, 612 963, 612 967, 612 990

GF07.04-P-4117IB

Camshaft Hall sensor, location/task/design/function

18.11.03

ENGINE 611.961 as of 1.6.99 in MODEL 210.006 /007 /206 /606

ENGINE 611.962 in MODEL 203.004 /006 /204 /206 /706 up to Model Year 8

ENGINE 612.961 in MODEL 210.016 /216 /616

ENGINE 612.962 in MODEL 203.016 /216 up to Model Year 8

ENGINE 612.963 in MODEL 163.113

ENGINE 613.960 in MODEL 220.026 /026 /126

ENGINE 613.961 in MODEL 210.026 /226

ENGINE 612.990 in MODEL 203.018 /218 /718 up to Model Year 8

ENGINE 612.967 in MODEL 209.316

Camshaft Hall sensor, location/task/design/function

P14.20-0258-01

Shown on engine 611

B6/1 Camshaft Hall sensor

Camshaft Hall sensor position

At the last injector on the cylinder head.

Camshaft Hall sensor task

Detecting the camshaft position contactlessly by means of a segment at the camshaft. The CDI control unit (N3/9) detects the ignition TDC position of cylinder 1 from the signal supplied by the camshaft Hall sensor (B6/1). The injection timing point is synchronized on the basis of the signal supplied by the camshaft Hall sensor (B6/1) and the crankshaft position sensor (L5).

Camshaft Hall sensor design

GF07.04-P-4117-03I

Camshaft Hall sensor function

GF07.04-P-4117-02I

Odkazované dokumenty