All specified repair work on the brake caliper was conducted using tool kits from the Knorr company tool box, with order no. K004789.
As part of ongoing technical developments of their product, the Knorr company has revised or optimized the content of the tool box. The new version of the tool box is available under order no. K037001.
W42.10-1466-01
Tool kit from Knorr company (order no. K002252) | ||||
T2 | Installation tool | |||
T30 | Thrust piece | |||
T31 | Spacer | |||
T32 | Pressure screw | |||
Modified thrust piece (T30) | ||||
A | Previous thrust piece T30 | |||
B | New thrust piece T30 | |||
Pfeil | Recess | |||
W42.10-1465-01
The tool kit for pressing in the thrust pieces with boot with brake caliper installed, order no. K002252, has been changed.
If, on disk brake SN 5000, the thrust pieces with boot and installed brake caliper were replaced, the modified tool kit must be used. It can be recognized by the new thrust piece T30 (B) with recess (arrow).
If only the modified tool kit is required, then it can be ordered from week 19/2014 onwards with order no. K002252.
The new tool box, order no. K037001, is available immediately with the modified tool kit version K002252.