bt3531p001401a

Rear axle center assembly end cover with non-machined sealing surface

Typ bt · téma 35.31 · verze 0100 · 2000-10-23

Platí pro: Rear axle center assembly dia. 168 in MODELS 170, 210 Rear axle center assembly dia. 168 in MODEL 202.078 except CODE (450) Taxi version Rear axle center assembly dia. 185 in MODELS 170, 202.087 /088 /089 /188, 208, 210 Rear axle center assembly dia. 185 in MODEL 202.194 except CODE (450) Taxi version Rear axle center assembly dia. 185 in MODEL 202.078 with CODE (450) Taxi version Rear axle center assembly dia. 198 in MODELS 170, 202.193, 208, 210, 220 Rear axle center assembly dia. 198 in MODEL 202.194

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.31 Rozvodovka — Řada 170 · Řada 202 (modely 078, 087, 088, 089, 188, 193, 194) · Řada 208 · Řada 210 · Řada 215 · Řada 220

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.50 Skříň/nosná trubka/můstek/nosník/roura hnacího hřídele — Řada 170 · Řada 202 (modely 078, 087, 088, 089, 188, 193, 194) · Řada 208 · Řada 210 · Řada 215 · Řada 220

BT35.31-P-0014-01A

Rear axle center assembly end cover with non-machined sealing surface

Rear axle center assembly dia. 168 in MODELS 170, 210

Rear axle center assembly dia. 168 in MODEL 202.078 except CODE (450) Taxi version

Rear axle center assembly dia. 185 in MODELS 170, 202.087 /088 /089 /188, 208, 210

Rear axle center assembly dia. 185 in MODEL 202.194 except CODE (450) Taxi version

Rear axle center assembly dia. 185 in MODEL 202.078 with CODE (450) Taxi version

Rear axle center assembly dia. 198 in MODELS 170, 202.193, 208, 210, 220

Rear axle center assembly dia. 198 in MODEL 202.194 with CODE (450) Taxi version

Rear axle center assembly dia. 210 in MODELS 208, 210, 215, 220
Rear axle center assembly 210E

Rear axle center assembly end cover with non-machined sealing surface

P35.31-2039-10

As of 08.05.00 the end cover for the rear axle center assembly will be modified to dia. 168 mm, dia. 185 mm.

As of 23.05.00 the end cover for the rear axle center assembly will be modified to dia. 198 mm.

As of 15.05.00 the end cover for the rear axle center assembly will be modified to dia. 210 mm in the 210E rear axle center assembly.

A The previous end cover has a machined sealing surface (a, arrow) and the entire surface will be coated with Hylomar sealant.

B The new end cover has a non-machined sealing surface (cast sealing surface, b, arrow). Can be detected from the groove or projection (c, arrow). Loctite 5900 sealant must be applied in order to provide a seal.

Rear axle center assembly end cover with dia. 185 mm ring gear is shown.