bt3531p001301b

Radial sealing ring on side of rear axle housing and connecting flange modified

Typ bt · téma 35.31 · verze 0101 · 2002-03-18

Platí pro: Rear axle center assembly dia. 198 in MODEL 129.058 as of 1.6.94, 129.059, 129.063 as of 1.6.94, 129.064, 140.02 /03 as of 1.6.94, 170.465 /466, 202.033 /093 /133 /193, 203.006 /064 /206 /264 /706, 208.365 /370 /465 /470, 210.006 /015 /017 /025 /045 /053 /055 /063 /065 /08 /206 /215 /217 /225 /245 /263 /265 /28 /606 /663, 220.063 /065 /165 Rear axle center assembly dia. 198 in MODEL 202.085 with TRANSMISSION 717 Rear axle center assembly dia. 198 in MODEL 202.134 /194, 203.004 /204, 210.007 with CO

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.31 Rozvodovka — Řada 129 (modely 058, 059, 063, 064, 068, 076) · Řada 140 (modely 02*, 03*) · Řada 170 (modely 465, 466) · Řada 202 (modely 033, 085, 093, 133, 134, 193, 194) · Řada 203 (modely 004, 006, 064, 204, 206, 264, 706) · Řada 208 (modely 365, 370, 374, 465, 470) · Řada 210 (modely 006, 007, 015, 016, 017, 025, 026, 045, 053, 055, 063, 065, 070, 074, 08*, 206, 215, 216, 217, 225, 226, 245, 263, 265, 270, 274, 28*, 606, 616, 663) · Řada 215 (modely 375, 378) · Řada 220 (modely 026, 063, 065, 070, 075, 165, 170, 175, 178) · Řada 230 (modely 474, 475)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava — Řada 129 (modely 058, 059, 063, 064, 068, 076) · Řada 140 (modely 02*, 03*) · Řada 170 (modely 465, 466) · Řada 202 (modely 033, 085, 093, 133, 134, 193, 194) · Řada 203 (modely 004, 006, 064, 204, 206, 264, 706) · Řada 208 (modely 365, 370, 374, 465, 470) · Řada 210 (modely 006, 007, 015, 016, 017, 025, 026, 045, 053, 055, 063, 065, 070, 074, 08*, 206, 215, 216, 217, 225, 226, 245, 263, 265, 270, 274, 28*, 606, 616, 663) · Řada 215 (modely 375, 378) · Řada 220 (modely 026, 063, 065, 070, 075, 165, 170, 175, 178) · Řada 230 (modely 474, 475)

Platí také pro motory/převodovky: 717 ***

BT35.31-P-0013-01B

Radial sealing ring on side of rear axle housing and connecting flange modified

As of 01.10.01

Rear axle center assembly dia. 198
in MODEL 129.058 as of 1.6.94,
129.059,
129.063 as of 1.6.94,
129.064,
140.02 /03 as of 1.6.94,
170.465 /466, 202.033 /093 /133 /193, 203.006 /064 /206 /264 /706, 208.365 /370 /465 /470, 210.006 /015 /017 /025 /045 /053 /055 /063 /065 /08 /206 /215 /217 /225 /245 /263 /265 /28 /606 /663, 220.063 /065 /165

Rear axle center assembly dia. 198 in MODEL 202.085 with TRANSMISSION 717

Rear axle center assembly dia. 198 in MODEL 202.134 /194, 203.004 /204, 210.007 with CODE (450) Taxi version

Rear axle center assembly dia. 210
in MODEL 129.068,
129.076 as of 1.2.98,
208.374, 210.016 /026,
210.070 /074 as of 1.2.98,
210.216 /226,
210.270 /274 as of 1.2.98,
210.616, 215.375 /378, 220.026 /070 /075 /170 /175 /178, 230.474 /475
rear axle center assembly 210E

A new radial sealing ring and a new connecting flange with protection ring or a new rear axle shaft with protection ring were phased in as of 01.10.01.

This improves the seal at the connecting flange or at the rear axle shaft against dirt from outside.

If one of the two components (new connecting flange / rear axle shaft or new radial sealing ring) is replaced for the first time, then the following must be observed:

If a new radial sealing ring is installed, a new protection ring must also be installed on the connecting flange or on the rear axle shaft.

If a new connecting flange (with new protection ring) or a new rear axle shaft (with new protection ring) is installed, a new radial sealing ring must also be installed.

Only then is correct sealing guaranteed.

Radial sealing ring on side of rear axle housing and connecting flange modified

P35.31-2054-11

Version as of 01.10.01 with double labyrinth seal

32 Radial sealing ring

33 Connecting flange

33k Connecting flange protection ring

50 Rear axle housing