Intermediate piece from charge air housing to turbocharger altered

Typ bt · téma 09.41 · verze 0101 · 2009-02-16

Platí pro: ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954 ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954 ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001 ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 09 Sání vzduchu, plnění › 09.41 Plnicí potrubí/chlazení plnicího vzduchu — Řada 000 (modely 001) · Řada 942 (modely 9**) · Řada 950 · Řada 952 · Řada 953 · Řada 954

EinPAS 15 Motor › 15.30 Sání vzduchu/přeplňování › 15.30.33 Sací potrubí/potrubí plnicího vzduchu — Řada 000 (modely 001) · Řada 942 (modely 9**) · Řada 950 · Řada 952 · Řada 953 · Řada 954

Platí také pro motory/převodovky: 541 9**, 542 9**, 941 9**

BT09.41-W-0002-01A

Intermediate piece from charge air housing to turbocharger altered



ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954

ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954

ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001

ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

Intermediate piece from charge air housing to turbocharger altered

W09.40-1078-11

Material and form of the intermediate piece altered

The intermediate piece (1) (rubber wrapped) was altered to be an intermediate piece (2) made out of die-casting (GD-AlSi) or permanent mold casting (GK-AlSi). Two sealing rings (3) were also mounted in the altered intermediate piece (2).

Sealing of the oil pressure line from the turbocharger to the charge air housing has been improved by this alteration.

 If wear occurs on intermediate piece (1) then it will be replaced by intermediate piece (2) with sealing rings (3).