W82.85-1566-11
1 Drill holes with dia. 3 mm at existing marks (arrows) on contact surface in center of instrument panel.
W82.85-1567-11
2 Secure mounting plate (1) to contact surface in center of instrument panel using screws (2).
3 Drill dia. 5.5 mm holes in contact surface in center of the instrument panel through holes (arrows) in mounting plate (1).
W82.85-1568-11
4 Position counterplate (4) from below and secure ball joint (5) of universal bracket to mounting plate using screws (6).
5 Make openings (7, 8) in rubber mat (9) and put on rubber mat (9).
W82.85-1647-11
6 Fasten ball joint (10) with screws/bolts (11) to mobile phone cradle (12).
Always use screws from parts kit, as these are screws with inch thread.