az8264d0001a

Retrofitting CD changer

Typ az · téma 82.64 · verze 0100 · 2006-10-31

Platí pro: MODEL 901, 902, 903, 904, 905 with CODE (EF6) Radio Sound 20 with CODE (EF7) Radio Sound 30 with CODE (ET8) Sound 30 auto-pilot system (APS)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.64 Měnič CD — Řada 901 · Řada 902 · Řada 903 · Řada 904 · Řada 905

EinPAS 31 Komunikace/informace/zábava › 31.67 Přehrávání médií/datové nosiče › 31.67.3 Dodatečná montáž/přemontování — Řada 901 · Řada 902 · Řada 903 · Řada 904 · Řada 905

AZ82.64-D-0001A

Retrofitting CD changer

4.10.00

MODEL 901, 902, 903, 904, 905
with CODE (EF6) Radio Sound 20
with CODE (EF7) Radio Sound 30
with CODE (ET8) Sound 30 auto-pilot system (APS)

Retrofitting CD changer

D82.64-1101-06

1 Radio

2 Wiring harness

3 Fiber optic cable
(only code ET8, Radio Sound 30 APS)

4 CD changer

Removing

1

Remove passenger seat

Bucket seat

AR91.10-D-1020A

Bench seat

AR91.10-D-1030A

2

Remove cover from seat frame

Bucket seat

3

Remove side access cover from seat frame

4

Remove center tunnel cover below instrument panel

5

Switch off radio

6

Remove radio

With code EF6, EF7:

Do not disconnect connector of connection leads

With code ET8:

Disconnect only 10-pin connector C

7

Lay floor covering in passenger footwell down to side

Installation

8

Retrofit CD changer in seat frame

AZ82.64-D-0001-07A

Sealing compound

*BR00.45-Z-1014-01A

9

Retrofit CD changer wiring harness

With code EF6, EF7:

AZ82.64-D-0001-01A

With code ET8:

Remove caps for fiber optic cable and plugs for equipment connections only shortly before connecting. Route fiber optic cable so that it is protected against being stepped on; do not kink and avoid routing radii of < 25 mm.

AZ82.64-D-0001-01B

10.1

Connect CD changer wiring harness to radio and install radio.

With code EF6, EF7.

10.2

Connect 10-pin connector C and fiber optic cable to radio and install radio

With code ET8.

11.1

Connect wiring harness to CD changer

With code EF6, EF7.

Tie back wiring harness excess in seat frame.

11.2

Connect wiring harness and fiber optic cable to CD changer.

With code ET8

Tie back wiring harness excess in seat frame. Fold excess of fiber optic cable in seat frame together in loose loops.

12

Check CD player function according to operating instructions.

13

Fit remaining parts to vehicle

14

Lift vehicle and coat area of mounting holes on vehicle floor with sealant.

Sealing compound

*BR00.45-Z-1014-01A

Repair materials

Number

Designation

Order number

BR00.45-Z-1014-01A

Adhesive tape

A 000 989 98 85

Parts ordering notes

Part no.

Designation

Quantity

B6 656 02 66

CD changer for code EF6, EF7 (Radio Sound 20 or 30)

1

B6 656 02 67

CD changer for code ET8 (Radio Sound 30 APS)

1

Odkazované dokumenty