Subsequently process side wall/load compartment trim · az7220d000404ts · Mercedes-Benz WIS

AZ72.20-D-0004-04TS	Subsequently process side wall/load compartment trim
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A

Model	907.6, 910.6
	with code V21 (Interior panelling luxury)
Model	907.6, 910.6
	with code VA1 (Panelling in load comp. up to belt rail standard)
Model	907.6, 910.6
	with code VA3 (Interior trim, cargo bay to roof height, washable)
Model	907.6
	with code V25 (Basic panelling in load compart. up to belt rail)
Model	907.6
	with code VA2 (Load space int. trim up to roof (wood))
Model	907.7
Model	910.6
	with code VA2 (Load space int. trim up to roof (wood))

Repair materials

Number	Designation	Order number
BR00.45-Z-1025-04A	Cleaner	A 005 989 19 71
BR00.45-Z-1026-07A	Masking tape	Use corresponding commercially available repair materials.

 The next steps are shown on the left component part and must be performed in the same way on the component part of the right side of the vehicle.

Shown on model 907.7

D72.20-A016-05

Shown on model 907.6 with code V25 (load compartment trim up to belt rail simple)

D72.20-A017-05

1	Clean contact surface on side wall trim (2) in and around area B.

2	Stick masking tape generously in and around area B.

 This allows for better marking of the cutting lines.

3	Mark cutting lines on the masking tape.

 Observe dimensions (d, e, f).

4	Cut out side wall trim (2) along the cutting lines (area B).

5	Rework cutting edges on the side wall trim (2) with files and deburr.

6	Remove the remaining masking tape and clean side wall trim (2) in the area of the cutout.

as0000z001701a Nebezpečí poranění řeznými ranami, resp. odřeninami u dílů vozidla s ostrými hranami