as4200b000101a

Risk of death caused by limbs being caught or crushed by rotating parts when performing tests on the brake test stand

Typ as · téma 42.00 · verze 0100 · 2016-02-12

Platí pro:

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.00 Všeobecné — Řada 368 · Řada 382 · Řada 384 · Řada 386 · Řada 634 · Řada 688 · Řada 693 · Řada 694 · Řada 695 · Řada 696 · Řada 958 · Řada 979

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.15 Provozní brzda/podtlakový systém › 21.15.1 Základní informace — Řada 368 · Řada 382 · Řada 384 · Řada 386 · Řada 634 · Řada 688 · Řada 693 · Řada 694 · Řada 695 · Řada 696 · Řada 958 · Řada 979

AS42.00-B-0001-01A

Risk of death caused by limbs being caught or crushed by rotating parts when performing tests on the brake test stand

While the vehicle is on the roller dynamometer leave it only in emergency operation. During the tests, nobody may remain underneath the vehicle or in the area of rotating parts. In case of an emergency, switch-off the roller dynamometer at the EMERGENCY DISCONNECTION switch.

Danger!

Risk of death

Freely spinning parts in the area of the running engine and of the power train, as well as in the area of the roller dynamometer rollers may cause serious injuries with risk of death.

Protection measures or behavior rules

The dynamometer is to be operated only by trained staff.

Before placing the vehicle on the roller dynamometer, the driver must make sure the roller dynamometer is ready to be operated (master switch ON).

While the vehicle is on the roller dynamometer it is forbidden to stay under the vehicle or in the pit.

While the vehicle is on the roller dynamometer, the driver may leave his driver position only in a case of emergency.

During the tests, nobody may remain in the area of the rollers, of the wheels or of the transmission shafts.

In cases of emergency, turn-off the roller dynamometer through the red EMERGENCY DISCONNECTION switch.

Observe the particularities of the roller dynamometer in the service instructions of the roller dynamometer.