ar9800p020302f

Masking when painting roof panelling - center

Typ ar · téma 98.00 · verze 0101 · 2006-10-31

Platí pro: MODEL 168

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 98 Lakování › 98.00 Všeobecné — Řada 168

EinPAS 40 Konzervace/lakování › 40.15 Lakování/péče o lak › 40.15.31 Lakování, kovový podklad — Řada 168

AR98.00-P-0203-02F

Masking when painting roof panelling - center

Masking when painting lamella sliding roof

AR98.00-P-0203-05A

Repair materials

Number

Designation

Order number

BR00.45-Z-1004-07A

Stegoband, insert depth 18 mm

L-Tec Lacktechnik GmbH
Mittelweg 13
93413 Cham
Germany
Tel. +49 9971 760 123
Fax +49 9971 760 111
www.lack-technik.de

BR00.45-Z-1003-07A

Plastic inserts

-

Masking when painting roof panelling - center

P98.00-1025-01

1 Remove side roof molding strips, replace.

2 Mask side roof molding channel with masking tape.

3 Mask windshield with cord.

4.1 On models with lamella sliding roof:

Mask rubber gasket on lamella sliding roof with Stego tape or plastic intermediate layers. Cover lamellas with masking paper.

5 Cover complete vehicle with masking paper.

Masking when painting roof panelling - center

P98.00-1026-01

In order to achieve a continuous transition to the present paintwork in the roof channel at the rear window mask as follows:

6 Mask roof channel with masking tape (leave approx. 20 mm extending up).

7 Fold upward extending masking tape back and glue onto masking paper.

After completing the paintwork (before drying) pull off the masking tape folded back so that the wet paint can run at the transition without an edge.

Odkazované dokumenty