Repair materials
Number | Designation | Order number |
BR00.45-Z-1009-07A | Soft-edge masking foam 19 mm x 35 m, 1 box with 7 rolls | 3M Deutschland GmbH |
BR00.45-Z-1008-07A | Soft-edge masking foam 13 mm x 50 m, 1 box with 10 rolls | 3M Deutschland GmbH |
P98.00-0206-01
Covering on beads and offsets
The painted exterior surface of the body is divided by strips, covers and joints in sectional paintwork. This reduces the amount of work required for painting jobs.
Beading and stepped edges which are not fitted with trim strips are to be masked so as to obtain a smooth transition to the existing paintwork.
1 Mask off the existing paintwork 5 mm from the edge.Stick the adhesive tape (1) over this, fold it over and secure it with strips of adhesive tape (2).
P98.00-0207-01
2 Remove adhesive tape (1).
After completing the paintwork (before drying), remove the adhesive tape (1) so that the wet paint can blend at the transition without forming an edge.
P98.00-2090-01
Covering beads when painting adjacent parts (e.g. door, engine hood):
Method A:
1 Mask off the fold 5 mm away from the area to be painted using masking paper (6).
2 Overlap this with adhesive tape (3), fold it over and secure with strip of adhesive tape (4) so that it is flush with the area to be painted. Close the door.
P98.00-2091-01
Method B:
1 Mask off the fold 5 mm away from the area to be painted using masking paper (6).
2 Fold in one edge of the adhesive tape (5) by 1/4 of the width and stick to the remaining part.
3 Fasten prepared adhesive tape (5) in beaded area so that the side glued together is flush with the surface to be painted. Close the door.
P98.00-2092-01
Method C:
1 Glue soft tape (7), without using cover paper into bead, so that it is flush with the surfaces to be painted. Close the door.