Cavity preservation following repair work

AR97.20-P-1500SC

Cavity preservation following repair work

27.7.10

 Danger!

Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when handling anticorrosion agents.

Never spray anticorrosion agents on flames or glowing hot objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.

AS97.00-Z-0001-01A



Notes on cavity preservation

AH97.20-P-0001-01B

1

Perform repair preservation twice in sequence, in shaded areas through vehicle openings (arrows), after a flash-off time of 5 minutes.

 Apply cavity sealant from inside in shaded areas following sealing and paintwork, however, before performing assembly work.

The spraying hose should be stiff and the nozzles should spray at angle to the front and rear. The cavities should be dry.

Insert spray hoses as far as possible into hollow cavities. Spray while inserting and pulling out slowly.

The processing temperature should not be less than 15 °C. Additional preservation measures may be required depending on the repair area deviating from the standard cavity preservation illustrated.



Processing instructions for cavity preservation agent

AP97.20-P-0640-01SX

MB cavity wax preservation, 1 l

*BR00.45-Z-1003-05A

2

Remove cavity sealant from drain holes

Number

Designation

Order number

BR00.45-Z-1003-05A

Cavity preservation, solvent-free (1 l container)

A 000 986 72 70 05