Permanent underfloor protection (containing solvent)
The underfloor protection is suited for processing underbodies as well as for transitions to underfloor protection applied at the factory.
Not suited for sealing work (seam sealing). Blow through spray gun with solvent after use. Expose air hole on screw-in thread to prevent spray gun from sticking
-----------------------------------------------------------------------------------------
Underfloor protection (water-base dispersion), gray
The permanent underfloor protection is a water-base dispersion which is suited for processing underbody, fender bottom sections as well as the outer surface. For processing on the outer surface
(e.g. below CBS front end, longitudinal members at entrance), thin material with 5 % water to achieve better coverage.
Not suited for transitions to the underfloor protection and seam sealing work (seam sealing) processed (insufficient adhesion and crack formation). After finishing work clean tools thoroughly with water to prevent sticking Before reuse moisten air flap with mineral oil so that spray fog does not dry on.
-----------------------------------------------------------------------------------------
1 All areas to which permanent underfloor protection is to be applied must be thoroughly cleaned (steam cleaner). In particular, remove wax and oil residues as well as loose pieces of PVC thoroughly. Grind corroded points down to bare metal and prime.
Electric plastic hot air blower and flat-spray nozzle with scraper
http://gotis.aftersales.mercedes-benz.com
A hot air blower and a flat-spray nozzle with integrated scraper or rotating wire brushes is suitable for removing PVC material.
2 Uniformly apply permanent underfloor protection
Compressed air gun$
http://gotis.aftersales.mercedes-benz.com
Do not spray underfloor protection on major assemblies, otherwise functions may be impaired.
Maintain drying time before painting.