P97.10-2506-09
Outer A-pillar area, shown on model 220
P97.10-2153-06
Outer A-pillar and front longitudinal member area
P97.10-2158-06
Inner A-pillar area
P97.10-2527-09
Rear fender area
P97.10-2491-08
Wheelhouse and rear longitudinal member area
P97.10-2490-09
Underfloor area, general
1 Seal spot welds of area to be repaired with seam sealing material
Insert plastic plugs and grommets with sealing compound.
Keep sealant out of threads on weld nuts and threaded bolts by masking or covering with cardboard sleeves. Also keep drain openings and contact surfaces for axle mounts, windows and detachable body components free of sealant.
It is necessary to seal accessible spot weld flanges on both sides. If accessible from one side only seal corresponding surface.
Observe standard seals!