P97.00-2058-06
Area of rear, sidewall and C-pillar
A Surface joints
B Unfinished body joints (bonded)
P97.00-2059-06
Area of rear wheelhouse, rear fender and rear end
A Surface joints
B Unfinished body joints (bonded)
P97.10-2493-09
Area of rear end and left and right inner trunk
P97.10-2041-09
Area of inner rear passenger compartment
A Surface joints
P97.10-2046-09
Area of longitudinal member on rear cross member
A Surface joints
P97.10-2490-09
Underfloor area, general
1 Seal spot welds of area to be repaired with seam sealing material
Insert plastic plugs and grommets with sealing compound.
Keep sealant out of threads on weld nuts and threaded bolts by masking or covering with cardboard sleeves. Also keep drain openings and contact surfaces for axle mounts, windows and detachable body components free of sealant.
It is necessary to seal accessible spot weld flanges on both sides. If accessible from one side only seal corresponding surface.
Observe standard seals!