ar9430p5300tx

Remove/install bottom parts of noise encapsulation

Typ ar · téma 94.30 · verze 0101 · 2007-10-09

Platí pro: MODEL 219.322 with ENGINE 642

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 94 Hluky karosérie, tlumení hluku › 94.30 Protihlukové pouzdro — Řada 219 (modely 322)

EinPAS 35 Karoserie/rám/montované díly › 35.25 Tlumicí prvek/spodní kryt/utěsnění/spodní ochrana › 35.25.41 Zakrytování podvozku/protihlukové zapouzdření/ochrana spodku — Řada 219 (modely 322)

Platí také pro motory/převodovky: 642 ***

AR94.30-P-5300TX

Remove/install bottom parts of noise encapsulation

8.4.05

MODEL 219.322 with ENGINE 642

Remove/install bottom parts of noise encapsulation

P94.30-2014-05

Bottom pat of front noise encapsulation

1 Bolt

2 Rubber lip

Remove/install bottom parts of noise encapsulation

P94.30-2015-05

Bottom part of middle noise encapsulation

1 Bolt

Remove/install bottom parts of noise encapsulation

P94.30-2016-05

bottom part of rear noise encapsulation

1 Bolt

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle with lifting platform

AR00.60-P-1000TX

2

Take out screws (1) and take off bottom parts of noise encapsulation

Observe removal sequence for noise encapsulation bottom sections: First remove bottom part of middle noise encapsulation.

Installation: Install bottom part of front noise encapsulation in such a way that the rubber lips (2) are concealed by the bumper.

3

Install in the reverse order

Odkazované dokumenty