Remove/install rear seat belt buckle

AR91.40-P-1516P

Remove/install rear seat belt buckle

4.2.10

 

Remove/install

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag unit with deployment face up, do not subject to temperatures above
100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A



Notes on performing repair, body work and welding on vehicles with airbags and ETR units

Model 203, 215, 220

AH91.00-P-0002-01M



Assessment of airbag and belt tensioner units in accident vehicles

Models 129 as of 1.7.93, 163, 168, 170, 202 as of 1.7.93, 203, 208, 210, 215, 220, 463, 638, 901, 902, 903, 904

AH91.00-P-0006-01B



Legal requirements on handling and storing airbags and emergency tensioning retractor units

Model 124, 129, 140, 163, 168, 170, 202, 203, 208, 210, 215, 220, 314, 316, 318, 461, 463, 638, 901, 902, 903, 904, 950, 952, 953, 954, 970, 972, 974, 975, 976

AH91.00-P-0004-01A

1

Remove rear seat cushion

Model 203.0 except code (287a) through-loading feature

AR91.12-P-1020PC

1

Release rear seat cushion and fold toward front

Model 203.0 with code (287a) Through-loading feature

Model 203.2/7

2

Unclip seat adapter (9)

Model 203.0 with code (287a) Through-loading feature

Model 203.2/7

 Lay sealing felt aside and pull seat adapter forwards at the screw clips (10).

3

Move seat adapter (9) out of retaining tab (11)

Model 203.0 with code (287a) Through-loading feature

Model 203.2/7

 Press to the rear in the center.

4

Remove seat adapter (9)

Model 203.0 with code (287a) Through-loading feature

Model 203.2/7

 Pay attention to retaining tab (11).

5

Release and remove connectors

 Left rear belt tensioner squib connectors (R12/6), right rear belt tensioner squib connectors (R12/7).

6

Remove bolt (1)

 Model 203.7 belt end fitting not present.

 Installation: Ensure that clamping bracket catches

 Screw on belt end fitting

*BA91.40-P-1001-01A

7

Remove bolt (2)

 Installation: Ensure that clamping bracket catches

 Screw on rear belt buckle

*BA91.40-P-1007-01A

8

Remove seat belt buckles (3, 4, 5)

 Model 203.7 center rear seat belt buckle (5) not present.

If seat belt buckle with emergency tensioning retractor (3, 4) is exchanged, the defective unit must be disposed of properly: 



Notes on disposing of airbag and emergency tensioning retractor units

OS91.00-P-0001-01A

Make emergency belt tensioner units unusable.

AR91.40-P-0611A

9

Install in the reverse order

Number

Designation

Model
203

BA91.40-P-1001-01A

Screw on belt end fitting

Nm

30

BA91.40-P-1007-01A

Bolt at rear seat belt buckle

Nm

30