AR91.40-P-0683P | Remove, replace and install rear center seat belt | 4.2.10 |
MODEL 203.0 with CODE (287) Through-loading feature
P91.12-2211-01
9 Seat adapter
10 Screws/bolts, seat adapter
P91.40-2185-06
1 Screw on belt end fitting
2 Seat belt
3 Automatic seat belt retractor screws
4 Rear seat backrest
5 Automatic belt retractor screw
8 Automatic belt retractor
| Remove/install | ||
Danger! | Risk of injury caused by release of spring in the automatic belt retractor is released. | Never disassemble automatic belt retractors | |
1 | Release rear seat cushion and fold toward front | ||
2 | Remove bolt (10) | ||
3 | Remove seat adapter (9) | ||
4 | Remove screw (1) at belt end fitting | Installation: Ensure that belt end fitting catches. | |
Screw on belt end fitting | |||
Torx bit set | |||
5 | Detach cover of rear seat backrest as far as necessary | See: | |
Remove/install rear seat backrest cover | |||
6 | Remove screw (5) | ||
7 | Remove screw/bolt (3) at automatic belt retractor (8) | Screw/bolt at rear of automatic belt retractor | |
Torx bit set | |||
8 | Remove automatic belt retractor (8) | ||
9 | Install in the reverse order |
Seat belts/emergency tensioning retractors
Number | Designation | Model | |
BA91.40-P-1001-01A | Screw on belt end fitting | Nm | 30 |
BA91.40-P-1006-01A | Bolt to rear inertia reel | Nm | 30 |
Torx bit set
000 589 01 10 00
Odkazované dokumenty
- ar9118p1870p
- as9100z000201a Nebezpečí poranění při uvolnění pružin navíječů bezpečnostních pásů