1 Seat belt guide bracket
2 Automatic belt retractor
3 Seat belt end fitting
P91.40-2564-03
P91.40-2565-01
P91.40-2566-01
P91.40-2580-01
1 Seat belt guide bracket
3 Seat belt end fitting
8 Screw
2 Automatic belt retractor
5 Screw
| Remove/Install | ||
Danger! | Risk of injury. Injury may result when the tension in the spring in the automatic belt retractor is released. | Never disassemble automatic belt retractors. | |
1 | Check seat belts and buckles for external damage and correct operation | ||
| Check seat belts and buckles for external damage and correct operation | ||
2 | Fold rear seat down forwards | See Operator's Manual | |
3 | Push cap for the seat belt guide bracket (1) upward and remove it | ||
4 | Undo nut from seat belt guide bracket (1) | | |
Loctite 243 | |||
5 | Remove cap from belt end fitting (3) | ||
6 | Unscrew bolt (8) from belt end fitting (3) | | |
Loctite 243 | |||
7 | Unscrew bolt (5) at automatic belt retractor (2) | Installation: Note different versions (left and right) of inertia reel. | |
Loctite 243 | |||
Noise in the inertia reel during seat belt retraction is caused by operation. The only available response to negative customer feedback regarding unacceptable noise levels is to replace the safety belt assembly in its entirety. Never use oil or grease to eliminate noises. | |||
8 | safety belt removal | ||
9 | Install in the reverse order |
Seat belts/emergency tensioning retractors
Number | Designation | Model 461 | |
BA91.40-P-1001-01C | Belt end fitting bolt | Nm | 35 |
BA91.40-P-1005-01C | Unscrew bolt/nut from rear seat belt guide bracket | Nm | 35 |
BA91.40-P-1006-01C | Bolt to rear inertia reel | Nm | 25 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1133-02A | Loctite 243 | A 613 989 09 71 |
Odkazované dokumenty
- ap9140p9150glc Kontrola bezpečnostních pásů a zámků bezpečnostních pásů ohledně vnějšího poškození a funkce
- as9100z000201a Nebezpečí poranění při uvolnění pružin navíječů bezpečnostních pásů