ar9125p1580tx

Remove/install the pneumatic pump for dynamic seat control

Typ ar · téma 91.25 · verze 0300 · 2006-12-15

Platí pro: MODEL 219.3 with CODE (433) Left dynamic seat, incl. multicontour seat with CODE (434) Right dynamic seat, incl. multicontour seat

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 91 Sedadla, lůžka, zádržný systém › 91.25 Multikonturové sedadlo (MKS) — Řada 219 (modely 3**)

EinPAS 37 Vnitřní výbava › 37.26 Sedadlo vpředu › 37.26.51 Čerpadlo/nádrž — Řada 219 (modely 3**)

AR91.25-P-1580TX

Remove/install the pneumatic pump for dynamic seat control

4.12.06

MODEL 219.3
with CODE (433) Left dynamic seat, incl. multicontour seat
with CODE (434) Right dynamic seat, incl. multicontour seat

Remove/install the pneumatic pump for dynamic seat control

P91.25-2268-04

1 Soundproofing

2 Bracket

3 Pneumatic lines

4 Electrical connector

5 Vent line

M40/1 Pneumatic pump for dynamic seat control

Modification notes

21.11.06

Special tool added

Step 5

Remove/install

1

Remove side paneling in left side of trunk

AR68.30-P-4800TX

2

Fold up soundproofing (1) from pneumatic pump for dynamic seat control (M40/1)

3

Remove vent line (5) from soundproofing (1)

4

Disconnect electrical connector (4)

5

Seal off pneumatic lines (3) of pneumatic pump for dynamic seat control (M40/1)

*000589043700

6

Remove pneumatic pump for dynamic seat control (M40/1) with soundproofing (1) upwards out of bracket (2)

7

Remove strut in front of overpressure reservoir for dynamic seat control

Only when installing a new pneumatic pump for dynamic seat control (M40/1), on vehicles up to 31.8.06

AR91.25-P-1570TX

8

Install new pneumatic wiring harness for dynamic seat control pneumatic pump (M40/1)

Only when installing a new pneumatic pump for dynamic seat control (M40/1), on vehicles up to 31.8.06

AR91.25-P-1580-01T

9

Install in the reverse order

10

Activate pneumatic pump for dynamic seat control (M40/1)

After installing new pneumatic pump for dynamic seat control (M40/1).

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

11

Carry out function check

Remove/install the pneumatic pump for dynamic seat control

Pliers

000 589 04 37 00

Odkazované dokumenty