P91.18-0267-05
1 Hand wheel
2 Backrest cover
3 Backrest frame
4 Upholstery clips for top lateral retention
5 Rubberized fiber matting
6 Upholstery clips for longitudinal retention
7 Longitudinal retaining wire
8 Right head restraint guide
9 Left head restraint guide
(with release button)
10 Screws
11 Tensioning element
P91.18-0265-06
1 Hand wheel
2 Backrest cover
3 Backrest frame
4 Upholstery clips for top lateral retention
5 Rubberized fiber matting
6 Upholstery clips for longitudinal retention
Arrows Attachment strips for cover (2) and tab on rubberized fiber matting (5)
P91.18-0266-09
1 Hand wheel
2 Backrest cover
3 Backrest frame
Arrows Longitudinal retention position
8 Right head restraint guide
9 Left head restraint guide
12 Textile strip for top lateral retention
4 Upholstery clips
5 Rubberized fiber matting
7 Longitudinal retaining wire
Arrows Tab on rubberized fiber matting
| Removal | ||
1 | Front seat backrest removed | ||
2 | Tensioning element (11) on front seat backrest removed | ||
3 | Head restraint guides (8 and 9) on front seat removed | ||
4 | Lay front seat backrest down on suitable surface with cover pointing downward | ||
5 | Pull off hand wheel (1) | ||
6 | Unhook backrest cover (2) all the way around on the backrest frame (3) (arrows) | ||
7 | Unhook upholstery clips (4) on spring wire | ||
8 | Pull tab at bottom of rubberized fiber matting (5) (arrows) down and out and remove backrest frame (3) from rubberized fiber matting (5) | ||
9 | Unhook upholstery clip (6) by turning upholstery clip 90° with flat pliers | ||
10 | Unhook upholstery clip (4) on lateral retaining strip (12) and remove | ||
11 | Remove Velcro strip on side of rubberized fiber matting (5) | ||
12 | Pull backrest cover (2) off of rubberized fiber matting (5) and remove | ||
| Installation | ||
13 | Insert upholstery clip (6) into rubberized fiber matting (5) and align | ||
14 | Fold backrest cover (2) in at side and position on rubberized fiber matting (5) and align | When replacing retaining wires pull into fabric sleeves in cover | |
| Upholstery filling of seat modified | Valid only when fitting new seat covers or new rubberized fiber matting | |
15 | Connect longitudinal retaining wires (7) with upholstery clips (arrows) | ||
| Installation tool for retaining wire | Model 210 | |
16 | Pull top of backrest cover (2) over "top" of rubberized fiber matting (5) | ||
17 | Align and attach backrest cover (2) at side with Velcro strips to rubberized fiber matting (5) | ||
18 | Insert backrest frame (3) into rubberized fiber matting (5) and expose rubberized fiber matting (5) in upper area | ||
19 | Position rubberized fiber matting tab (arrow) at bottom over spring bracket | ||
20 | Hook or insert backrest cover (2) all the way around on backrest frame (3) | ||
21 | Connect upholstery clips (4) to lateral retaining strip (12) and simultaneously hook in spring wire for backrest frame | ||
22 | Install both head restraint guides (8 and 9) | ||
23 | Install tensioning element (1) on front seat backrest | ||
24 | Install hand wheel (1) on shaft for backrest adjustment gear | Check catch, replace hand wheel if necessary | |
25 | Screw front seat backrest onto seat adjustment mechanism | ||
26 | Continue to reinstall in opposite order |